Other Name: Bulb; Center High Mount Stop Light, Rear; Engine Compartment, Back Up, Turn Signal; Parking, Dome, Interior, Tail, Car; Backup Lamp Bulb; Dome Lamp Bulb; Parking Lamp Bulb; High Mount Bulb; Exterior Bulbs.
Position: Rear
Base No.: 13466
Item Weight: 0.30 Pounds
Item Dimensions: 0.4 x 0.4 x 1.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: D7TZ-13466-A
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2005 Ford Expedition Submodels:
Eddie Bauer, King Ranch, Limited, NBX, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
Other Name: Bulb; Turn Signal & Parking Light Bulb; License Plate Light Bulb; Side Marker Light Bulb; Tail Light Bulb; Side Marker Bulb; Signal Lamp Bulb; Dome Lamp Bulb; Parking Lamp Bulb; Exterior Bulbs.
Position: Front
Replaces: F4BZ-13466-J, E8GY-13466-C
Base No.: 13466
Item Weight: 0.30 Pounds
Item Dimensions: 0.4 x 0.4 x 1.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: C2AZ-13466-C
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2005 Ford Expedition Submodels:
Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, Platinum, SSV, XL, XLS, XLT, XLT Sport | 6 Cyl 3.5 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
Other Name: Bulb; Fog Light Bulb, Front; Fog Light Bulbs; Car Bulbs; Fog Lamp Bulb
Position: Front
Replaces: 1S7Z-13466-D
Base No.: 13466
Item Weight: 0.80 Pounds
Item Dimensions: 0.4 x 0.4 x 1.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: XL3Z-13466-AA
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2005 Ford Expedition Submodels:
Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, NBX, Platinum, SSV, XL, XLS, XLT, XLT Sport | 6 Cyl 3.5 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
Other Name: Bulb; Dome Light, Front; Map Light, Front; Courtesy Light; Trunk Light; Interior Car Bulbs.; Dome Lamp Bulb; Cargo Lamp Bulb; Map Lamp Bulb
Position: Front
Replaces: F4DZ-13466-A
Base No.: 13466
Item Weight: 0.30 Pounds
Item Dimensions: 0.4 x 0.4 x 1.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: F58Z-13466-A
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2005 Ford Expedition Submodels:
Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, NBX, Platinum, SSV, XL, XLS, XLT, XLT Sport | 6 Cyl 3.5 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
Other Name: Bulb; Center High Mount Stop Light Bulb; Back Up Light Bulb; License Plate Light Bulb; Turn Signal Light Bulb; Signal Lamp Bulb; various types for exterior and interior lighting.
Position: Rear Outer
Replaces: E9JY-13466-A, F4ZZ-13466-A
Base No.: 13466
Item Weight: 0.30 Pounds
Item Dimensions: 0.4 x 0.4 x 1.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: E5RY-13466-B
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2005 Ford Expedition Submodels:
Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, NBX, Platinum, SSV, XL, XLS, XLT, XLT Sport | 6 Cyl 3.5 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2005 Ford Expedition Submodels:
Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, NBX, Platinum, SSV, Timberline, XL, XL STX, XLS, XLT, XLT Sport | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
Other Name: Bulb, Turn Signal & Parking, Tail, Backup, License Plate, Side Marker, Headlight; Backup Lamp Bulb; Signal, Parking, Stop, High Mount, Cornering, License, and Parking Light Bulbs.
Position: Lower Outer
Replaces: F8DZ-13466-AB, E8AZ-13466-A
Base No.: 13466
Item Weight: 0.40 Pounds
Item Dimensions: 0.4 x 0.4 x 1.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: F5DZ-13466-B
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2005 Ford Expedition Submodels:
Eddie Bauer, King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, NBX, Platinum, SSV, XL, XLS, XLT, XLT Sport | 6 Cyl 3.5 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
2005 Ford Expedition Headlight Bulb
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford Expedition Headlight Bulb available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford Expedition Headlight Bulb as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2005 Ford Expedition Headlight Bulb Parts Q&A
Q: How to Service the Headlight Bulb on 2005 Ford Expedition?
A: The service of headlamp bulbs requires turning OFF both the headlamp switch and ignition switch. Headlamp servicing for the Expedition starts with bolt-relaxation followed by bolt-removal and assembly-disconnection of electrical connectors. The process starts by removing all protective covers on both the low beam and high beam areas of the headlamp bulb. The 9004 and 9007 bulbs resemble one another but they cannot be exchanged with each other so first disconnect the electrical connector before removing the headlamp bulb. When servicing the HID headlamps on the Navigator you must first remove the front radiator air deflector and then take the three assembly bolts out before disconnecting electrical connectors. To access the HID low beam bulb the HID lamp cover and high beam cover should be removed while disconnecting the electrical connector and wedging the grommet into the headlamp assembly before carefully releasing the spring tabs. To replace a headlamp in the Navigator with standard headlamps begin by performing the identical sequence of tasks which includes removing the front radiator air deflector and three bolts and disconnecting electrical connectors and removing protective covers. You need to disconnect electrical connectors from both 9004 and 9007 bulbs before removing their respective headlamp bulbs. The procedure for bulb installation requires following the steps in reverse order from removal.