How to Service and Repair the Sway Bar Link on 2005 Ford F-150?

The hex holding feature should be used first to stop ball studs from rotating during nut removal and installation for sway bar link service and repair. Minor tapping of the wheel knuckle or sway bar should replace hammering ball studs when separating them from their connections because it prevents damage. Begin by taking off the upper nuts from the sway bar link then secure them at 133 Nm (98 ft. lbs.) during installation. Tighten these lower sway bar link nuts to 90 Nm (66 ft. lbs.) while installing them. Take out the sway bar bracket nuts followed by sway bar links and remove the sway bar before tightening it to 48 Nm (35 ft. lbs.) when reinstalling. You must follow the opposite steps of removal in order to finish the process.

OEM 2005 Ford F-150 Sway Bar Link

Stabilizer Sway Bar Link

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Sway Bar Links found

View related parts
2005 Ford F-150 Stabilizer Link, Front Part Number: EU2Z-5K483-A
$44.35 MSRP: $60.35
You Save: $16.00 (27%)
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Front; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Front
- Replaces: MEF-195, 4L3Z-5K483-BA
- Item Weight: 1.60 Pounds
- Item Dimensions: 9.9 x 3.6 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: EU2Z-5K483-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford F-150 Submodels:
- FX4, King Ranch, Lariat, STX, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2005 Ford F-150 Stabilizer Link, Front Part Number: 5L3Z-5K483-DA
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Front; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Front
- Base No.: 5K483
- Item Weight: 1.70 Pounds
- Item Dimensions: 19.8 x 6.1 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 5L3Z-5K483-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford F-150 Submodels:
- FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2005 Ford F-150 Stabilizer Link, Front Part Number: 5L3Z-5K483-CA
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Front; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Front
- Base No.: 5K483
- Item Weight: 2.00 Pounds
- Item Dimensions: 5.9 x 2.2 x 10.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 5L3Z-5K483-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford F-150 Submodels:
- FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS

2005 Ford F-150 Sway Bar Link

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford F-150 Sway Bar Link available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford F-150 Sway Bar Link as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Ford F-150 Sway Bar Link Parts Q&A

Q: How to Service and Repair the Sway Bar Link on 2005 Ford F-150?
A: The hex holding feature should be used first to stop ball studs from rotating during nut removal and installation for sway bar link service and repair. Minor tapping of the wheel knuckle or sway bar should replace hammering ball studs when separating them from their connections because it prevents damage. Begin by taking off the upper nuts from the sway bar link then secure them at 133 Nm (98 ft. lbs.) during installation. Tighten these lower sway bar link nuts to 90 Nm (66 ft. lbs.) while installing them. Take out the sway bar bracket nuts followed by sway bar links and remove the sway bar before tightening it to 48 Nm (35 ft. lbs.) when reinstalling. You must follow the opposite steps of removal in order to finish the process.