How to service the Water Pump on gasoline engines on 2005 Ford F-250 Super Duty?

A gasoline engine coolant pump service requires engine cooling system draining as the first step. Start by uninstalling the cooling fan along with the accessory drive belt. After removal of the four coolant pump pulley bolts proceed to tighten them to 25 Nm (18 ft. lbs.) before reinstalling. The next step involves unbolted the coolant pump with four bolts and removing the O-ring seal that should be discarded. After installing a new O-ring seal onto the mating surfaces users need to clean with metal surface prep then wet the seal with clean engine coolant before setting it into place. Follow the installation protocol by tightening the coolant pump to 25 Nm (18 ft. lbs.) before you finish by reversing the dismantling procedure.

OEM 2005 Ford F-250 Super Duty Water Pump

H2O Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Water Pumps found

View related parts
2005 Ford F-250 Super Duty Water Pump
Part Number: 4C3Z-8501-B
$131.76 MSRP: $221.82
You Save: $90.06 (41%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Pump Assembly - Water; Engine Water Pump; Water Pump Assembly
- Replaced by: 4C3Z-8501-D
- Replaces: PW-461, YC3Z-8501-AB, 7L3Z-8501-A, YC3Z-8501-AA
- Base No.: 8501
- Item Weight: 5.30 Pounds
- Item Dimensions: 6.8 x 5.7 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4C3Z-8501-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS
View related parts
2005 Ford F-250 Super Duty Water Pump
Part Number: 3L3Z-8501-CA
$51.84 MSRP: $83.64
You Save: $31.80 (39%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Pump Assembly - Water; Engine Water Pump; Water Pump Assembly
- Manufacturer Note: With M30 Hub
- Replaced by: 5L3Z-8501-AC
- Replaces: 5R3Z-8501-A, 5L2Z-8501-A, 1L2Z-8501-BB, F7UZ-8501-CA, F8AZ-8501-AA, PW-470, PW-387, YW7Z-8501-AA, AR3Z-8501-A, F4AZ-8501-A, AL3Z-8501-B, PW-499, YR3Z-8501-AB, YC2Z-8501-BA, PW-466, XC2Z-8501-BA
- Base No.: 8501
- Item Weight: 5.60 Pounds
- Item Dimensions: 6.6 x 5.6 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3L3Z-8501-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, King Ranch, Lariat, XL, XLT | 8 Cyl 5.4 L GAS
View related parts
2005 Ford F-250 Super Duty Water Pump
Part Number: 4C3Z-8501-C
$129.64 MSRP: $205.85
You Save: $76.21 (38%)
Product Specifications
- Other Name: Pump Assembly - Water; Engine Water Pump; Water Pump Assembly
- Replaces: 4C3Z-8501-AC, 4C3Z-8501-ABRM, PW-491
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4C3Z-8501-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following 2005 Ford F-250 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 8 Cyl 6.0 L DIESEL

2005 Ford F-250 Super Duty Water Pump

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford F-250 Super Duty Water Pump available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford F-250 Super Duty Water Pump as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Ford F-250 Super Duty Water Pump Parts Questions & Experts Answers

Q: How to service the Water Pump on gasoline engines on 2005 Ford F-250 Super Duty?
A: A gasoline engine coolant pump service requires engine cooling system draining as the first step. Start by uninstalling the cooling fan along with the accessory drive belt. After removal of the four coolant pump pulley bolts proceed to tighten them to 25 Nm (18 ft. lbs.) before reinstalling. The next step involves unbolted the coolant pump with four bolts and removing the O-ring seal that should be discarded. After installing a new O-ring seal onto the mating surfaces users need to clean with metal surface prep then wet the seal with clean engine coolant before setting it into place. Follow the installation protocol by tightening the coolant pump to 25 Nm (18 ft. lbs.) before you finish by reversing the dismantling procedure.