How to Service and Repair the Water Pump on Gasoline Engines on 2006 Ford F-250 Super Duty?

One must start coolant pump maintenance on gasoline engines by emptying the engine cooling system. Remove the cooling fan while taking off the accessory drive belt next. You must first remove the four bolts from the coolant pump pulley before tightening it to 25 Nm (18 ft. lbs.) when reinstalling it. Remove the four coolant pump placement bolts together with the O-ring seal which needs disposal. Install a new O-ring seal after cleaning the mating surfaces with metal surface prep. Use freshly cleaned engine coolant to lubricate the O-ring before putting it into place. Reinstall the coolant pump while tightening it to 25 Nm (18 ft. lbs.) then finish by reversing all removal procedures.

OEM 2006 Ford F-250 Super Duty Water Pump

H2O Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Water Pumps found

View related parts
2006 Ford F-250 Super Duty Water Pump
Part Number: 4C3Z-8501-B
$131.76 MSRP: $221.82
You Save: $90.06 (41%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Pump Assembly - Water; Engine Water Pump; Water Pump Assembly
- Replaced by: 4C3Z-8501-D
- Replaces: PW-461, YC3Z-8501-AB, 7L3Z-8501-A, YC3Z-8501-AA
- Base No.: 8501
- Item Weight: 5.30 Pounds
- Item Dimensions: 6.8 x 5.7 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4C3Z-8501-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS
View related parts
2006 Ford F-250 Super Duty Water Pump
Part Number: 3L3Z-8501-CA
$51.84 MSRP: $83.64
You Save: $31.80 (39%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Pump Assembly - Water; Engine Water Pump; Water Pump Assembly
- Manufacturer Note: With M30 Hub
- Replaced by: 5L3Z-8501-AC
- Replaces: 5R3Z-8501-A, 5L2Z-8501-A, 1L2Z-8501-BB, F7UZ-8501-CA, F8AZ-8501-AA, PW-470, PW-387, YW7Z-8501-AA, AR3Z-8501-A, F4AZ-8501-A, AL3Z-8501-B, PW-499, YR3Z-8501-AB, YC2Z-8501-BA, PW-466, XC2Z-8501-BA
- Base No.: 8501
- Item Weight: 5.60 Pounds
- Item Dimensions: 6.6 x 5.6 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3L3Z-8501-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, King Ranch, Lariat, XL, XLT | 8 Cyl 5.4 L GAS
View related parts
2006 Ford F-250 Super Duty Water Pump
Part Number: 4C3Z-8501-C
$129.64 MSRP: $205.85
You Save: $76.21 (38%)
Product Specifications
- Other Name: Pump Assembly - Water; Engine Water Pump; Water Pump Assembly
- Replaces: 4C3Z-8501-AC, 4C3Z-8501-ABRM, PW-491
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4C3Z-8501-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following 2006 Ford F-250 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 8 Cyl 6.0 L DIESEL

2006 Ford F-250 Super Duty Water Pump

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford F-250 Super Duty Water Pump available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford F-250 Super Duty Water Pump as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford F-250 Super Duty Water Pump Parts Questions & Experts Answers

Q: How to Service and Repair the Water Pump on Gasoline Engines on 2006 Ford F-250 Super Duty?
A: One must start coolant pump maintenance on gasoline engines by emptying the engine cooling system. Remove the cooling fan while taking off the accessory drive belt next. You must first remove the four bolts from the coolant pump pulley before tightening it to 25 Nm (18 ft. lbs.) when reinstalling it. Remove the four coolant pump placement bolts together with the O-ring seal which needs disposal. Install a new O-ring seal after cleaning the mating surfaces with metal surface prep. Use freshly cleaned engine coolant to lubricate the O-ring before putting it into place. Reinstall the coolant pump while tightening it to 25 Nm (18 ft. lbs.) then finish by reversing all removal procedures.