How to service and repair the front cross-member on 2005 Ford F-350 Super Duty?

Start the repair process on the transmission support crossmember after the vehicle achieves neutral position on a hoist system. Put a suitable transmission jack into use to handle the transmission weight. Proceed with the service work by starting with wire harness removal from the rear crossmember followed by transmission mount nuts from the rear. Initial steps require you to remove LH crossmember bolts and nuts but keep the mentioned bolt and nut in place. Move to the right-hand (RH) crossmember bracket by removing all its bolts and nuts followed by taking off the bracket. First uninstall the RH crossmember components consisting of bolts and nuts then the LH crossmember requires their bolt and nut to be taken out before removing the crossmember altogether. Fit the crossmember onto the transmission mount before easy installation of its nut. Begin by installing the LH crossmember bolts followed by the RH crossmember bolts and finish by inserting the bracket with its attached bolts in a loose state. Install the wire harness to the back of the crossmember while finishing with the tightening of RH crossmember bolts and rear insulator nuts.

OEM 2005 Ford F-350 Super Duty Front Cross-Member

Front Engine Cross Member

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Front Cross-Members found

View related parts
2005 Ford F-350 Super Duty Front Crossmember Part Number: F81Z-2510776-AA
$151.71 MSRP: $220.83
You Save: $69.12 (32%)
ADD TO CART
Product Specifications
- Other Name: Member Assembly - Cross Center; Floor Pan Crossmember, Center, Front; Crossmember; Member Assembly - Cross - Center
- Position: Front
- Base No.: 10776
- Item Weight: 26.30 Pounds
- Item Dimensions: 76.2 x 23.1 x 13.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F81Z-2510776-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford F-350 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
2005 Ford F-350 Super Duty Front Crossmember, Driver Side Part Number: F81Z-2510685-AA
Product Specifications
- Other Name: Cross Member Assembly - Front; Floor Pan Reinforcement, Left; Floor Pan Crossmember, Left; Floor Crossmember
- Position: Driver Side
- Base No.: 10685
- Item Weight: 5.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F81Z-2510685-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford F-350 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
2005 Ford F-350 Super Duty Front Crossmember Part Number: 4C3Z-5C128-AB
Product Specifications
- Other Name: Crossmember; Frame Crossmember, Front
- Manufacturer Note: Front lower blocker beam, Use W710065-S439 and N811403-S426 to attach, FROM 12/01/03
- Position: Front
- Base No.: 5C128
- Item Weight: 21.20 Pounds
- Item Dimensions: 7.2 x 51.0 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4C3Z-5C128-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford F-350 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
2005 Ford F-350 Super Duty Front Crossmember, Outer Passenger Side Part Number: F81Z-2510684-AA
Product Specifications
- Other Name: Cross Member Assembly - Front; Floor Pan Reinforcement, Right; Floor Pan Crossmember, Right; Floor Crossmember
- Position: Front Outer Passenger Side
- Base No.: 10684
- Item Weight: 5.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F81Z-2510684-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford F-350 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
2005 Ford F-350 Super Duty Rail End, Front Part Number: 5C3Z-5C145-BA
Product Specifications
- Other Name: Frame Assembly; Frame Side Member Assembly, Front
- Manufacturer Note: Service Only
- Position: Front
- Base No.: 5C145
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5C3Z-5C145-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford F-350 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL
View related parts
2005 Ford F-350 Super Duty Rail End, Front Part Number: 5C3Z-5C145-AA
Product Specifications
- Other Name: Frame Assembly; Frame Side Member Assembly, Front
- Manufacturer Note: Service Only
- Position: Front
- Base No.: 5C145
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5C3Z-5C145-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford F-350 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL

2005 Ford F-350 Super Duty Front Cross-Member

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford F-350 Super Duty Front Cross-Member available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford F-350 Super Duty Front Cross-Member as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Ford F-350 Super Duty Front Cross-Member Parts Q&A

Q: How to service and repair the front cross-member on 2005 Ford F-350 Super Duty?
A: Start the repair process on the transmission support crossmember after the vehicle achieves neutral position on a hoist system. Put a suitable transmission jack into use to handle the transmission weight. Proceed with the service work by starting with wire harness removal from the rear crossmember followed by transmission mount nuts from the rear. Initial steps require you to remove LH crossmember bolts and nuts but keep the mentioned bolt and nut in place. Move to the right-hand (RH) crossmember bracket by removing all its bolts and nuts followed by taking off the bracket. First uninstall the RH crossmember components consisting of bolts and nuts then the LH crossmember requires their bolt and nut to be taken out before removing the crossmember altogether. Fit the crossmember onto the transmission mount before easy installation of its nut. Begin by installing the LH crossmember bolts followed by the RH crossmember bolts and finish by inserting the bracket with its attached bolts in a loose state. Install the wire harness to the back of the crossmember while finishing with the tightening of RH crossmember bolts and rear insulator nuts.