How to Service the Oil Pressure Switch on 2005 Ford Focus?

In order to service the oil pressure switch, the vehicle is raised on the hoist with the transmission in the neutral position. Unplug the battery ground cable and unplug the electrical connector of the switch. Take out the switch, put pipe sealant on the threads and repeat the steps of removal in reverse order.

OEM 2005 Ford Focus Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pressure Switch found

View related parts
2005 Ford Focus Pressure Switch, Green Part Number: BE8Z-9278-A
$16.03 MSRP: $25.45
You Save: $9.42 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Switch Assembly - Oil Pressure; Engine Oil Pressure Switch; Oil Pressure Sending Unit; Switch; Oil Pressure Switch
- Replaces: 1S7Z-9278-AA, SW-6682
- Base No.: 9278
- Item Weight: 0.30 Pounds
- Item Dimensions: 6.1 x 4.2 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BE8Z-9278-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Focus Submodels:
- LX, RS, S, SE, SEL, ST, Titanium, ZTS, ZTW, ZX3, ZX4 ST, ZX5 | 3 Cyl 1.0 L GAS, 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS

2005 Ford Focus Oil Pressure Switch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford Focus Oil Pressure Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford Focus Oil Pressure Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Ford Focus Oil Pressure Switch Parts Q&A

Q: How to Service the Oil Pressure Switch on 2005 Ford Focus?
A: In order to service the oil pressure switch, the vehicle is raised on the hoist with the transmission in the neutral position. Unplug the battery ground cable and unplug the electrical connector of the switch. Take out the switch, put pipe sealant on the threads and repeat the steps of removal in reverse order.