How to Service the Oil Pressure Switch on 2006 Ford Focus?

The servicing process for the oil pressure switch begins with placing the vehicle on a hoist when the transmission is in neutral position. It is necessary to first disconnect the vehicle battery ground cable followed by removing the electrical connector from the oil pressure switch. The switch requires removal before threading Thread Sealant with PTFE onto its threads. Reinstall the switch by securely tightening it to 15 Nm (11 ft. lbs.) before following the installation process in reverse order.

OEM 2006 Ford Focus Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pressure Switch found

View related parts
2006 Ford Focus Pressure Switch, Green Part Number: BE8Z-9278-A
$2.27 MSRP: $3.60
You Save: $1.33 (37%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Switch Assembly - Oil Pressure; Engine Oil Pressure Switch; Oil Pressure Sending Unit; Switch; Oil Pressure Switch
- Replaces: 1S7Z-9278-AA, SW-6682
- Base No.: 9278
- Item Weight: 0.30 Pounds
- Item Dimensions: 6.1 x 4.2 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BE8Z-9278-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Focus Submodels:
- LX, RS, S, SE, SEL, ST, Titanium, ZTS, ZTW, ZX3, ZX4 ST, ZX5 | 3 Cyl 1.0 L GAS, 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS

2006 Ford Focus Oil Pressure Switch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Focus Oil Pressure Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Focus Oil Pressure Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford Focus Oil Pressure Switch Parts Q&A

Q: How to Service the Oil Pressure Switch on 2006 Ford Focus?
A: The servicing process for the oil pressure switch begins with placing the vehicle on a hoist when the transmission is in neutral position. It is necessary to first disconnect the vehicle battery ground cable followed by removing the electrical connector from the oil pressure switch. The switch requires removal before threading Thread Sealant with PTFE onto its threads. Reinstall the switch by securely tightening it to 15 Nm (11 ft. lbs.) before following the installation process in reverse order.