How to service and repair the brake light switch on 2005 Ford Freestar?

The first step to servicing the brake light switch requires disconnecting its electrical connector. After opening the self-locking clip on the brake light switch system remove the BPP switch. After that, remove the bushing. The new components should be installed by following the opposite order of the removal steps.

OEM 2005 Ford Freestar Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Light Switch found

View related parts
2005 Ford Freestar Stoplamp Switch
Part Number: 3F2Z-13480-CB
$29.38 MSRP: $45.45
You Save: $16.07 (36%)
Product Specifications
- Other Name: Switch Assembly - Stop Light; Brake Light Switch
- Replaces: 3F2Z-13480-BB, 3F2Z-13480-CA, SW-6673
- Base No.: 13480
- Item Weight: 0.30 Pounds
- Item Dimensions: 6.1 x 4.1 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3F2Z-13480-CB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Freestar Submodels:
- Base, Limited, S, SE, SEL, SES | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS

2005 Ford Freestar Brake Light Switch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford Freestar Brake Light Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford Freestar Brake Light Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Ford Freestar Brake Light Switch Parts Questions & Experts Answers

Q: How to service and repair the brake light switch on 2005 Ford Freestar?
A: The first step to servicing the brake light switch requires disconnecting its electrical connector. After opening the self-locking clip on the brake light switch system remove the BPP switch. After that, remove the bushing. The new components should be installed by following the opposite order of the removal steps.