OEM 2005 Ford Freestar Air Bag Sensor

2005 Ford Freestar Air Bag Sensor Parts Questions & Experts Answers

• Q: What precautions should be taken when servicing the Air Bag Sensor in the second row on the right-hand side on 2005 Ford Freestar?

  A: Wearing protective safety glasses remains essential when working on the right-hand side second-row side impact sensor while also never using a memory saver device because these actions protect from potential air bag discharge injuries. The RCM fuse removal will activate the air bag warning lamp by illuminating it through the ON position of the ignition switch thus indicating no SRS fault. A complete test of the SRS operational system must show no faults before the technician returns the vehicle to the customer. The repair of vehicles having second row bucket seats includes new part installation followed by diagnostic tests when the issue continues as a diagnostic solution. Start the procedure by disabling the system power and take out the rear door scuff plate while removing the safety belt anchor bolt which needs to be tightened at 40 Nm (30 lb-ft) when reinstalling these components. Locate the C-pillar quarter trim panel to gain access to the side impact sensor by removing it and separating necessary weather strips. The side impact sensor electrical connector needs disconnecting for the installer to remove two bolts while securely tightening both to 12 Nm (9 lb-ft) when installing new parts. Each step should include removing the side impact sensor with extra precaution to prevent webbing twists during reinstalling. Reverse the removal steps after which activate the system power and verify active restraint functionality.