FordParts
My Garage
My Account
Cart
OEM 2005 Ford Freestyle A/C Accumulator
Accumulator- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 A/C Accumulator found
2005 Ford Freestyle Dehydrator Part Number: 7F9Z-19C836-BA
$54.12 MSRP: $73.65You Save: $19.53 (27%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Kit; A/C Receiver Drier; Drier Desiccant Element; A/C Accumulator; Accumulator; Drier
- Replaces: 6F9Z-19959-BA, 5F9Z-19959-BA
- Base No.: 19C836
- Item Weight: 2.20 Pounds
- Item Dimensions: 16.3 x 4.6 x 9.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7F9Z-19C836-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Ford Freestyle A/C Accumulator
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford Freestyle A/C Accumulator available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford Freestyle A/C Accumulator as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2005 Ford Freestyle A/C Accumulator Parts Q&A
- Q: How to Service the A/C Accumulator on 2005 Ford Freestyle?A: The first step for A/C accumulator servicing involves recovering refrigerant then placing the vehicle in neutral position on a hoist. The removal of the condenser outlet fitting requires you to first remove its nut along with the O-ring seal which should be discarded before tightening the new fitting to 8 Nm (71 lb-in). The procedure starts with unscrewing the A/C accumulator outlet fitting nut then disconnecting the fitting before throwing out the old O-ring seal during replacement of new fittings that need to be tightened to 8 Nm (71 lb-in). Secure the A/C accumulator bracket bolts at 9 Nm torque when reinstalling them. When installing the A/C accumulator, reverse all uninstallation steps but ensure proper replacement of new O-ring seals while applying correct PAG oil amounts to the clean refrigerant system. The refrigerant system requires evacuation followed by leak testing then charge procedures should be completed.