How to service and repair the A/C Hose from the condenser to the evaporator on 2005 Ford Mustang?

Service procedures for fixing the condenser to evaporator line start with refrigerant recovery. Position the vehicle on a hoist in neutral position. Extractor the evaporator inlet line fitting before discarding the O-ring seal present at that point. Begin by separating the condenser-to-evaporator line clip and remove the condenser outlet fitting nut while separately disconnecting the fitting along with the O-ring seal. Continue by removing the condenser-to-evaporator line from its place. Reverse the removal method by following the installation order while adding new O-ring seals before completing the system lubrication process with clean PAG oil of proper quantity. As the final step complete both the evacuation and leak check on the refrigerant system and then add the charge. A new suction accumulator needs installation only when physical signs indicate failed A/C compressor contamination or suction accumulator damage occurs.

OEM 2005 Ford Mustang A/C Hose

Air Conditioning Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 A/C Hoses found

View related parts
2005 Ford Mustang A/C Hoses, Front Part Number: 4R3Z-19835-AB
$64.12 MSRP: $101.82
You Save: $37.70 (38%)
Product Specifications
- Other Name: Tube Assembly; A/C Pipe, Front; A/C Refrigerant Liquid Hose; A/C Hose; Front A/C Hose
- Position: Front
- Base No.: 19835B
- Item Weight: 4.10 Pounds
- Item Dimensions: 27.3 x 20.4 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4R3Z-19835-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Mustang Submodels:
- Base, Bullitt, GT, Shelby GT, Shelby GT500, Shelby GT500KR | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2005 Ford Mustang Inlet Tube Part Number: 4R3Z-19D734-AA
Product Specifications
- Other Name: Tube - Compressor To Manifold; A/C Refrigerant Liquid Hose; A/C Hose
- Base No.: 19D734
- Item Weight: 1.00 Pounds
- Item Dimensions: 11.1 x 4.6 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4R3Z-19D734-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Mustang Submodels:
- GT | 8 Cyl 4.6 L GAS
View related parts
2005 Ford Mustang A/C Hoses Part Number: 6R3Z-19D734-BA
Product Specifications
- Other Name: Tube - Compressor To Manifold; A/C Pipe; A/C Refrigerant Liquid Hose; A/C Hose; Tube Assembly
- Replaces: 4R3Z-19D734-BA
- Base No.: 19D734
- Item Weight: 2.80 Pounds
- Item Dimensions: 14.3 x 7.4 x 46.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6R3Z-19D734-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Mustang Submodels:
- Base | 6 Cyl 4.0 L GAS
View related parts
2005 Ford Mustang A/C Hoses Part Number: 5R3Z-19D742-A
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Suction Hose; A/C Refrigerant Liquid Hose; A/C Hose; Outlet Hose
- Replaces: 4R3Z-19D742-AA
- Base No.: 19D742
- Item Weight: 1.20 Pounds
- Item Dimensions: 7.7 x 34.2 x 48.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5R3Z-19D742-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Mustang Submodels:
- GT | 8 Cyl 4.6 L GAS
View related parts
2005 Ford Mustang A/C Hoses Part Number: 4R3Z-19972-AA
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Discharge Hose; A/C Refrigerant Liquid Hose; A/C Hose; Inlet Hose
- Manufacturer Note: Condenser to compressor
- Base No.: 19972
- Item Weight: 1.00 Pounds
- Item Dimensions: 8.8 x 9.3 x 37.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4R3Z-19972-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Mustang Submodels:
- GT | 8 Cyl 4.6 L GAS
View related parts
2005 Ford Mustang A/C Hoses, Rear Part Number: 4R3Z-19835-AA
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Suction Hose; A/C Pipe, Rear; A/C Refrigerant Liquid Hose; A/C Hose; Rear A/C Hose
- Manufacturer Note: Less Pressure Switch
- Position: Rear
- Base No.: 19835A
- Item Weight: 1.80 Pounds
- Item Dimensions: 11.4 x 13.7 x 45.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4R3Z-19835-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Mustang Submodels:
- Base, GT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS

2005 Ford Mustang A/C Hose

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford Mustang A/C Hose available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford Mustang A/C Hose as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Ford Mustang A/C Hose Parts Q&A

Q: How to service and repair the A/C Hose from the condenser to the evaporator on 2005 Ford Mustang?
A: Service procedures for fixing the condenser to evaporator line start with refrigerant recovery. Position the vehicle on a hoist in neutral position. Extractor the evaporator inlet line fitting before discarding the O-ring seal present at that point. Begin by separating the condenser-to-evaporator line clip and remove the condenser outlet fitting nut while separately disconnecting the fitting along with the O-ring seal. Continue by removing the condenser-to-evaporator line from its place. Reverse the removal method by following the installation order while adding new O-ring seals before completing the system lubrication process with clean PAG oil of proper quantity. As the final step complete both the evacuation and leak check on the refrigerant system and then add the charge. A new suction accumulator needs installation only when physical signs indicate failed A/C compressor contamination or suction accumulator damage occurs.