How to Service and Repair Front Brake Dust Shields on 2005 Ford Taurus?

A service technician must remove the brake disc as the first step for front brake disc shield repair and servicing. Keep full attention on preservation of the wheel knuckle during the process of drilling out brake disc shield rivets. Apply a center punch for removing the rivet mandrels followed by 5.5 mm (0.22 inch) drill bit usage to eliminate them but stay under 6 mm (0.24 inch) drill capacity if needed. The new brake disc shield installation requires aluminum rivets because they stop the formation of galvanic corrosion. Position the shield properly and fasten in place the rivets before reattaching the brake disc.

OEM 2005 Ford Taurus Brake Dust Shields

Brake Backing Plate

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Dust Shields found

View related parts
2005 Ford Taurus Backing Plate, Rear Part Number: F5OY-2C028-A
Product Specifications
- Other Name: Shield - Brake Disc Splash; Brake Dust Shield, Rear; Splash Shield; Brake Dust Shield
- Position: Rear
- Base No.: 2C028
- Item Weight: 0.80 Pounds
- Item Dimensions: 13.3 x 9.9 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: F5OY-2C028-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Taurus Submodels:
- GL, LX, SE, SE Comfort, SEL | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2005 Ford Taurus Backing Plate, Front Driver Side Part Number: 4F1Z-2K005-AA
Product Specifications
- Other Name: Shield - Splash; Brake Dust Shield, Front Left; Splash Shield; Brake Dust Shield
- Manufacturer Note: L.H., Triangle cutout
- Position: Front Driver Side
- Replaces: F5OY-2K005-A
- Base No.: 2K005
- Item Weight: 1.30 Pounds
- Item Dimensions: 11.1 x 9.5 x 11.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4F1Z-2K005-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Taurus Submodels:
- G, GL, LX, SE, SE Comfort, SEL, SES, SHO, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 8 Cyl 3.4 L GAS
View related parts
2005 Ford Taurus Backing Plate, Front Passenger Side Part Number: 4F1Z-2K004-AA
Product Specifications
- Other Name: Shield - Splash; Brake Dust Shield, Front Right; Splash Shield; Brake Dust Shield
- Manufacturer Note: R.H., Triangle cutout
- Position: Front Passenger Side
- Replaces: F5OY-2K004-A
- Base No.: 2K004
- Item Weight: 0.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4F1Z-2K004-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Taurus Submodels:
- G, GL, LX, SE, SE Comfort, SEL, SES, SHO, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 8 Cyl 3.4 L GAS
View related parts
2005 Ford Taurus Backing Plate, Rear Part Number: F3DZ-2C028-A
Product Specifications
- Other Name: Shield - Brake Disc Splash; Brake Dust Shield, Rear; Splash Shield; Brake Dust Shield
- Position: Rear
- Base No.: 2C028
- Item Weight: 1.40 Pounds
- Item Dimensions: 4.2 x 12.6 x 9.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: F3DZ-2C028-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Taurus Submodels:
- GL, LX, SE, SE Comfort, SEL, SES, SHO, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 3.4 L GAS

2005 Ford Taurus Brake Dust Shields

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford Taurus Brake Dust Shields available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford Taurus Brake Dust Shields as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Ford Taurus Brake Dust Shields Parts Q&A

Q: How to Service and Repair Front Brake Dust Shields on 2005 Ford Taurus?
A: A service technician must remove the brake disc as the first step for front brake disc shield repair and servicing. Keep full attention on preservation of the wheel knuckle during the process of drilling out brake disc shield rivets. Apply a center punch for removing the rivet mandrels followed by 5.5 mm (0.22 inch) drill bit usage to eliminate them but stay under 6 mm (0.24 inch) drill capacity if needed. The new brake disc shield installation requires aluminum rivets because they stop the formation of galvanic corrosion. Position the shield properly and fasten in place the rivets before reattaching the brake disc.