How to service and repair the front bumper cover on 2005 Ford Thunderbird?

The servicing process for front bumper cover begins with hoisting the vehicle into NEUTRAL position. A task should start with the headlamp assembly extraction followed by 7 pin-type retainer removal and upper radiator sight shield detachment. Remove the ten fender splash shield screws that exist in pairs of five along each side before unfastening the six screws from the front valance panel. To detach the front bumper cover from the bracket you should apply upward force while extending the cover sides. The front bumper cover harness electrical connector requires disconnecting followed by an unfastening process of the 2 lower bumper cover screws and 4 upper screws to separate the front bumper cover. Reinstallation requires screws to achieve a torque of 7 Nm (62 lb-in). You can disconnect the front bumper cover by removing the 6 bolts together with the 2 brackets while later re-tightening both components to 6 Nm (53 lb-in). After following the removal steps reverse the process to finish the installation.

OEM 2005 Ford Thunderbird Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Bumpers found

View related parts
2005 Ford Thunderbird Impact Bar, Rear
Part Number: 6W4Z-17906-A
$261.69 MSRP: $362.02
You Save: $100.33 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Impact Bar, Rear
- Manufacturer Note: Impact Bar - Steel
- Position: Rear
- Replaces: 1W4Z-17906-AA, 3W4Z-17906-AA, 6W6Z-17906-A, XW4Z-17906-AA
- Base No.: 17906
- Item Weight: 11.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6W4Z-17906-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Thunderbird Submodels:
- 50th Anniversary Edition, Base, James Bond Edition, Neiman Marcus, Pacific Coast Roadster | 8 Cyl 3.9 L GAS
View related parts
2005 Ford Thunderbird Bumper Cover, Front
Part Number: 1W6Z-17D957-EAA
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Position: Front
- Base No.: 17D957
- Item Weight: 11.10 Pounds
- Item Dimensions: 84.7 x 19.4 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1W6Z-17D957-EAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Thunderbird Submodels:
- 50th Anniversary Edition, Base, James Bond Edition, Neiman Marcus, Pacific Coast Roadster | 8 Cyl 3.9 L GAS
View related parts
2005 Ford Thunderbird Bumper Cover, Rear
Part Number: 1W6Z-17K835-BAA
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Manufacturer Note: Paint to match
- Position: Rear
- Base No.: 17K835
- Item Weight: 10.60 Pounds
- Item Dimensions: 84.8 x 29.4 x 15.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1W6Z-17K835-BAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Thunderbird Submodels:
- 50th Anniversary Edition, Base, James Bond Edition, Neiman Marcus, Pacific Coast Roadster | 8 Cyl 3.9 L GAS
View related parts
2005 Ford Thunderbird Impact Bar, Front
Part Number: 1W6Z-17757-AA
$195.60 MSRP: $284.72
You Save: $89.12 (32%)
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Impact Bar, Front
- Position: Front
- Base No.: 17757
- Item Weight: 16.50 Pounds
- Item Dimensions: 52.0 x 5.6 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1W6Z-17757-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Thunderbird Submodels:
- 50th Anniversary Edition, Base, James Bond Edition, Neiman Marcus, Pacific Coast Roadster | 8 Cyl 3.9 L GAS

2005 Ford Thunderbird Bumper

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford Thunderbird Bumper available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford Thunderbird Bumper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Ford Thunderbird Bumper Parts Questions & Experts Answers

Q: How to service and repair the front bumper cover on 2005 Ford Thunderbird?
A: The servicing process for front bumper cover begins with hoisting the vehicle into NEUTRAL position. A task should start with the headlamp assembly extraction followed by 7 pin-type retainer removal and upper radiator sight shield detachment. Remove the ten fender splash shield screws that exist in pairs of five along each side before unfastening the six screws from the front valance panel. To detach the front bumper cover from the bracket you should apply upward force while extending the cover sides. The front bumper cover harness electrical connector requires disconnecting followed by an unfastening process of the 2 lower bumper cover screws and 4 upper screws to separate the front bumper cover. Reinstallation requires screws to achieve a torque of 7 Nm (62 lb-in). You can disconnect the front bumper cover by removing the 6 bolts together with the 2 brackets while later re-tightening both components to 6 Nm (53 lb-in). After following the removal steps reverse the process to finish the installation.