How to service the evaporative emission canister purge valve on 2005 Ford Thunderbird?

You should start service of the evaporative emission canister purge valve by disconnecting the battery ground cable to eliminate explosion and fire risks from fuel vapor. Start by removing both the electrical connector from the EVAP canister purge valve then taking off the upper fuel vapor tube. First detach the two bracket securing nuts and reinstall them with 27 Nm torque (20 lb-ft). First detach the bracket which connects to the studs then disconnect the lower fuel vapor tube and remove the EVAP canister purge valve itself. Installation of the new valve requires the reversal of removal instructions with tight connection verification. You should execute a leak test and an evaporative emission repair verification drive cycle to check proper system operation after completion of the installation steps.

OEM 2005 Ford Thunderbird Canister Purge Valve

Vapor Canister Purge Valve EVAP

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Canister Purge Valves found

View related parts
2005 Ford Thunderbird Purge Valve
Part Number: 3U5Z-9C915-C
$48.18 MSRP: $75.20
You Save: $27.02 (36%)
ADD TO CART
Product Specifications
- Other Name: Valve Assembly; Vapor Canister Purge Solenoid; Vapor Canister Vent Solenoid; Canister Purge Valve; Purge Control Valve; Vapor Valve
- Replaces: 3W4Z-9C915-AA, 3U5Z-9C915-B, CX-1871
- Item Weight: 1.20 Pounds
- Item Dimensions: 5.5 x 2.7 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3U5Z-9C915-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Thunderbird Submodels:
- 50th Anniversary Edition, Base, James Bond Edition, Pacific Coast Roadster | 8 Cyl 3.9 L GAS
View related parts
2005 Ford Thunderbird Vent Control Solenoid
Part Number: XW4Z-9F945-AA
Product Specifications
- Other Name: Solenoid Assembly; Vapor Canister Purge Solenoid; Vapor Canister Vent Solenoid; Solenoid
- Base No.: 9F945
- Item Weight: 2.20 Pounds
- Item Dimensions: 6.3 x 6.2 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XW4Z-9F945-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Thunderbird Submodels:
- 50th Anniversary Edition, Base, James Bond Edition, Neiman Marcus, Pacific Coast Roadster | 8 Cyl 3.9 L GAS

2005 Ford Thunderbird Canister Purge Valve

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford Thunderbird Canister Purge Valve available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford Thunderbird Canister Purge Valve as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Ford Thunderbird Canister Purge Valve Parts Questions & Experts Answers

Q: How to service the evaporative emission canister purge valve on 2005 Ford Thunderbird?
A: You should start service of the evaporative emission canister purge valve by disconnecting the battery ground cable to eliminate explosion and fire risks from fuel vapor. Start by removing both the electrical connector from the EVAP canister purge valve then taking off the upper fuel vapor tube. First detach the two bracket securing nuts and reinstall them with 27 Nm torque (20 lb-ft). First detach the bracket which connects to the studs then disconnect the lower fuel vapor tube and remove the EVAP canister purge valve itself. Installation of the new valve requires the reversal of removal instructions with tight connection verification. You should execute a leak test and an evaporative emission repair verification drive cycle to check proper system operation after completion of the installation steps.