FordParts
My Garage
My Account
Cart
OEM 2005 Lincoln Aviator Dipstick Tube
Oil Dipstick Tube- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Dipstick Tube found
2005 Lincoln Aviator Tube Part Number: 2C5Z-6754-AA
Product Specifications- Other Name: Tube - Oil Level Indicator; Oil Dipstick Tube
- Base No.: 6754
- Item Weight: 1.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2C5Z-6754-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Lincoln Aviator Dipstick Tube
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Lincoln Aviator Dipstick Tube available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Lincoln Aviator Dipstick Tube as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2005 Lincoln Aviator Dipstick Tube Parts Q&A
- Q: How to Service and Repair the Engine Oil Dipstick Tube on 2005 Lincoln Aviator?A: Rationale for servicing or repairing the engine oil dip stick and dip stick tube begins with hoisting the vehicle to neutral position. The first service step demands the removal of both the steering intermediate shaft followed by the LH front inner fenderwell. The first step involves removing the two exhaust Y-pipe nuts from the Y-pipe before installation where torques should be set to 20 Nm (15 ft. lbs.). The technician should first remove the three heat shield bolts of the LH exhaust manifold before taking out the heat shield and then reinstall the parts with a torque of 11 Nm (8 ft. lbs.). You should first remove the eight LH exhaust manifold nuts one by one and then take away the exhaust manifold. First remove the oil level indicator from the tube before reaching the oil indicator tube bracket nut that needs to be tightened up to 9 Nm (80 inch lbs.) during reinstallation. The oil indicator tube bracket bolt should be removed along with the tube before installation where proper torque to 10 Nm (89 inch lbs.) needs to be applied. The completion step in this process requires performing the removal procedure in reverse order.