FordParts
My Garage
My Account
Cart
OEM 2005 Lincoln LS Ignition Coil
Ignition Coil Resistor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Ignition Coils found
2005 Lincoln LS Ignition Coil Part Number: 2W4Z-12029-B
$47.19 MSRP: $77.09You Save: $29.90 (39%)Ships in 1 Business DayProduct Specifications- Other Name: Coil Assembly - Ignition; Direct Ignition Coil; Direct Ignition Coil Oe Quality; Coil On Plug Coil; Ignition Coil Set
- Replaces: 2W4Z-12029-BD
- Base No.: 12029
- Item Weight: 0.60 Pounds
- Item Dimensions: 8.7 x 8.0 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2W4Z-12029-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Lincoln LS Ignition Coil Part Number: 2W4Z-12029-A
$80.36 MSRP: $134.91You Save: $54.55 (41%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Coil Assembly - Ignition; Direct Ignition Coil Oe Quality; Direct Ignition Coil; Coil On Plug Coil
- Replaces: 2W4Z-12029-AB, 2W4Z-12029-AC
- Base No.: 12029
- Item Weight: 0.60 Pounds
- Item Dimensions: 8.3 x 7.9 x 7.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2W4Z-12029-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Lincoln LS Ignition Coil
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Lincoln LS Ignition Coil available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Lincoln LS Ignition Coil as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2005 Lincoln LS Ignition Coil Parts Q&A
- Q: How to service and repair the ignition coil-on-plug on 2005 Lincoln LS?A: The service and repair of ignition coil-on-plug requires initial removal of EVAP canister purge valve nuts then safe placement of valve and bracket around left-hand ignition coils. Start by removing the 12 bolts then take out the 2 ignition coil covers while eliminating all silicone sealant and residue from both parts and the valve cover surface and ignition coil wiring harness. First disconnect the 8 ignition coil electrical connectors followed by removing their 8 bolts. A light twisting motion during ignition coil removal will break their seals to facilitate easier extraction. Installation of ignition coils requires applying both silicone brake caliper grease and dielectric compound inside the ignition boots before bolt installation at 5 Nm (44 lb-in). Prior to applying silicone sealant through the valve cover notch, examine and dry the ignition coil electrical connectors followed by sealing with a 12.7-mm (0.5-inch) silicone bead. Place the ignition coil harness inside the silicone adhesive bead and then spread the sealant around the wire harness and notch area. Install the ignition coil covers followed by tightening their bolts to 5 Nm (44 lb-in) before placing the EVAP canister purge valve bracket and securing its nuts at 21 Nm (15 lb-ft).