My Garage
Cart

OEM 2005 Lincoln Navigator Dimmer Switch

Light Dimmer Switch
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Dimmer Switch found

  • 2005 Lincoln Navigator Dimmer Switch - 2L7Z-11691-AAA
    2005 Lincoln Navigator Dimmer Switch Diagram - 2L7Z-11691-AAA
    View related parts
    Product Specifications
    • Other Name: Resistor Assembly; Instrument Light Rheostat
    • Base No.: 11691
    • Item Weight: 0.40 Pounds
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 2L7Z-11691-AAA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2005 Lincoln Navigator Submodels:
    • Base, Luxury, Ultimate | 8 Cyl 5.4 L GAS

2005 Lincoln Navigator Dimmer Switch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Lincoln Navigator Dimmer Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Lincoln Navigator Dimmer Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Lincoln Navigator Dimmer Switch Parts Q&A

  • Q: How to service and repair the headlamp dimmer switch on 2005 Lincoln Navigator?
    A: The procedure for repairing the headlamp dimmer switch starts by taking out the steering wheel. A tilt release handle will let you reach the second screw that enables removal of the lower steering column shroud and its attaching screws. The next step should be to remove the screw located behind the multifunction switch in order to separate the upper steering column shroud. Next detach the bolt before employing the release to elevate the switch. The small screwdriver will help depres the connector release tab on the second connector but you must disconnect the connectors in the indicated sequence to remove the multifunction switch. Fitting the new switch requires executing step-by-step the removal steps in reverse order.