FordParts
My Garage
My Account
Cart
OEM 2005 Lincoln Navigator Seat Motor
Car Seat Motor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
5 Seat Motors found
2005 Lincoln Navigator Motor Part Number: 2L1Z-14547-BA
Product Specifications- Other Name: Motor Assembly - Seat Adjuster
- Base No.: 14547B
- Item Weight: 3.00 Pounds
- Item Dimensions: 13.6 x 2.7 x 8.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L1Z-14547-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Lincoln Navigator Motor Part Number: 5L1Z-14547-BA
Product Specifications- Other Name: Motor Assembly - Seat Adjuster
- Replaces: 4L1Z-14547-AA
- Base No.: 14547A
- Item Weight: 2.50 Pounds
- Item Dimensions: 3.4 x 3.4 x 21.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 5L1Z-14547-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Lincoln Navigator Motor Part Number: 2L1Z-14547-CA
Product Specifications- Other Name: Motor Assembly - Seat Adjuster
- Base No.: 14547B
- Item Weight: 2.70 Pounds
- Item Dimensions: 14.3 x 3.0 x 9.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L1Z-14547-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Lincoln Navigator Motor Part Number: 2L1Z-14547-EA
Product Specifications- Other Name: Motor Assembly - Seat Adjuster
- Base No.: 14547C
- Item Weight: 3.20 Pounds
- Item Dimensions: 10.3 x 4.4 x 9.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L1Z-14547-EA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Lincoln Navigator Motor Part Number: 2L1Z-14547-DA
Product Specifications- Other Name: Motor Assembly - Seat Adjuster
- Base No.: 14547C
- Item Weight: 3.10 Pounds
- Item Dimensions: 9.5 x 4.3 x 8.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L1Z-14547-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Lincoln Navigator Seat Motor
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Lincoln Navigator Seat Motor available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Lincoln Navigator Seat Motor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2005 Lincoln Navigator Seat Motor Parts Q&A
- Q: How to Service and Repair a Front Seat Recliner Motor in a Power Seat Motor System on 2005 Lincoln Navigator?A: Service of the front seat recliner motor begins with removing the 40 percent seat followed by depowering the supplemental restraint system (SRS). Start by removing the lower seat backrest cover followed by uninstalling two screws from the support rod. Push the tab to remove the head restraint while watching that the pins from the head restraint sleeve cannot match each other. The head restraint sleeve ends can be released by pushing them together inside the seat backrest. Invert the seat backrest trim cover and handle it gently to protect the hook-and-loop strip fixed onto the seat backrest foam. The foam pad from the seat backrest should be removed from the thermo-electric device before separating the foam pad. Start the service procedures by removing the retainer clip from the power recliner motor shaft end and proceeding with the removal of the motor shaft then its cover. The power recliner motor electrical connector gets disconnected first before you uninstall the motor bolt and remove the power recliner motor itself. Start by properly placing the power recliner motor and screw the bolt into position before reattaching its electrical connector. Stick the power recliner shaft inside the motor before passing it through the seat and attach the shaft cover and its retainer clip to the shaft end. Glass the seat backrest foam pad onto the thermo-electric device before installing the seat backrest trim cover with both hook-and-loop fasteners fastened in position. Proceed with attaching the head restraint sleeves before adding both the head restraint along with the hook-and-loop strip and J-clip inseparable connection. The last step involves recovering the power to SRS after installing two screws in support rod, lower backrest cover and 40 percent seat.
Related 2005 Lincoln Navigator Parts
2005 Lincoln Navigator Air Bag Sensor
2005 Lincoln Navigator Antenna Base
2005 Lincoln Navigator Body Control Module
2005 Lincoln Navigator Engine Control Module
2005 Lincoln Navigator Neutral Safety Switch
2005 Lincoln Navigator PCV Valve Hose
2005 Lincoln Navigator Parking Assist Distance Sensor
2005 Lincoln Navigator Relay
2005 Lincoln Navigator Seat Switch
2005 Lincoln Navigator Suspension Control Module
2005 Lincoln Navigator Throttle Position Sensor
2005 Lincoln Navigator Window Switch