My Garage
Cart

OEM 2005 Lincoln Town Car Axle Shaft

Car Axle Shaft
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Axle Shafts found

  • 2005 Lincoln Town Car Axle Shaft - 3W1Z-4234-A
    2005 Lincoln Town Car Axle Shaft Diagram - 3W1Z-4234-A
    View related parts

    2005 Lincoln Town Car Axle Shaft, Rear Part Number: 3W1Z-4234-A

    $204.88 MSRP: $278.81
    You Save: $73.93 (27%)
    ADD TO CART
    Product Specifications
    • Other Name: Shaft Assembly - Rear Axle; Drive Axle Shaft, Rear; Axle Shafts
    • Manufacturer Note: 28 Spline
    • Position: Rear
    • Replaces: 3W1Z-4234-KA
    • Base No.: 4234
    • Item Weight: 23.70 Pounds
    • Item Dimensions: 40.4 x 8.7 x 8.4 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • Require Quantity: 2
    • SKU: 3W1Z-4234-A
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2005 Lincoln Town Car Submodels:
    • Cartier, Cartier L, Designer Series, Executive, Executive L, Executive Protection Series, Protection Series, Signature, Signature L, Signature Limited, Ultimate, Ultimate L | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
  • 2005 Lincoln Town Car Axle Shaft Diagram - 6W1Z-4234-A
    View related parts
    Product Specifications
    • Other Name: Shaft Assembly - Rear Axle; Drive Axle Shaft, Rear; Axle Shafts
    • Manufacturer Note: 31 Spline
    • Position: Rear
    • Replaces: 5W1Z-4234-A
    • Base No.: 4238
    • Item Weight: 22.60 Pounds
    • Item Dimensions: 41.7 x 8.4 x 8.3 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • Require Quantity: 2
    • SKU: 6W1Z-4234-A
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2005 Lincoln Town Car Submodels:
    • Cartier, Cartier L, Designer Series, Executive, Executive L, Executive Protection Series, Protection Series, Signature, Signature L, Signature Limited, Ultimate, Ultimate L | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
  • 2005 Lincoln Town Car Axle Shaft Diagram - 6W1Z-4234-B
    View related parts
    Product Specifications
    • Other Name: Shaft Assembly - Rear Axle
    • Manufacturer Note: 31 Spline
    • Position: Rear
    • Base No.: 4234
    • Item Weight: 27.30 Pounds
    • Item Dimensions: 41.6 x 8.4 x 8.4 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • Require Quantity: 2
    • SKU: 6W1Z-4234-B
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2005 Lincoln Town Car Submodels:
    • Cartier, Cartier L, Designer Series, Executive, Executive L, Executive Protection Series, Protection Series, Signature, Signature L, Signature Limited, Ultimate, Ultimate L | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS

2005 Lincoln Town Car Axle Shaft

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Lincoln Town Car Axle Shaft available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Lincoln Town Car Axle Shaft as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Lincoln Town Car Axle Shaft Parts Q&A

  • Q: How should the axle shaft be serviced to ensure safety and proper installation on 2005 Lincoln Town Car?
    A: Users servicing the axle shaft must disable air suspension electrical power by turning off the air suspension switch found in the LH side of the luggage compartment to avoid sudden air spring pressure or vacuum changes. The first operation involves taking out the rear brake caliper with brake disc support from mechanics wire then moving the rear brake anti-lock sensor to a safe location after unfastening its bolt. Begin by extracting the differential pinion shaft lock bolt prior to taking out the differential housing cover along with the differential pinion shaft. Tread carefully when taking away the U-washer by advancing the axle shaft because the rubber O-ring in this groove might become damaged. Reinstall the differential pinion shaft by extending the axle shaft towards the outside before securing the pinion shaft lock bolt without excessive tightness. You should withdraw the axle shaft while making sure to avoid injuring the wheel bearing oil seal. To install the wheel bearing oil seal, apply oil on its lip and then retrieve the differential pinion shaft without harming the oil seal itself. Place the axle shaft with its U-washer on the button side of the shaft and extend the axle shaft until the U-washer fits correctly into the side gear. The hole in the differential pinion shaft needs alignment with the lock bolt hole before attaching a lock bolt. Complete the installation by putting back the differential housing cover and the rear brake anti-lock sensor then the brake disc.