How to Service and Repair the Vapor Canister on 2005 Lincoln Town Car?

Any efforts to service or repair the evaporative emission control canister require starting with the vehicle in neutral position at a hoist. The safety process starts with disconnecting the battery cable to reduce the possibility of electrical sparks which could trigger fuel vapor combustion. The next step requires you to disconnect the evaporative emission (EVAP) vapor tube quick connect coupling then unclip its retaining clip before removing the breather tube from the frame. You need to uninstall the EVAP canister bracket assembly retainers through unfastening two nuts and three rivets from their position. First disconnect the electrical connector of the EVAP canister vent solenoid before separating the EVAP canister from the vehicle. Installation of the new canister follows the opposite order of removal steps while including leakage testing and a necessary drive cycle for evaporative emission repair verification.

OEM 2005 Lincoln Town Car Vapor Canister

Fuel Vapor Canister

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Vapor Canisters found

View related parts
2005 Lincoln Town Car Vapor Canister Part Number: F6DZ-9D653-BA
$163.54 MSRP: $269.09
You Save: $105.55 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Reservoir Assembly; Vapor Canister Purge Solenoid
- Base No.: 9D653
- Item Weight: 3.70 Pounds
- Item Dimensions: 3.7 x 12.3 x 11.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F6DZ-9D653-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Lincoln Town Car Submodels:
- Cartier, Cartier L, Executive, Executive L, Executive Protection Series, Protection Series, Signature, Signature L, Signature Limited, Ultimate, Ultimate L | 8 Cyl 4.6 L GAS
View related parts
2005 Lincoln Town Car Vapor Canister Part Number: 6W1Z-9D653-AA
$452.24 MSRP: $750.91
You Save: $298.67 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cannister - Fuel Vapour Storage; Vapor Canister Purge Solenoid; Cannister - Fuel Vapour Store
- Manufacturer Note: Complete asy., canister, vent valve, bracket and hoses.
- Replaces: 5W1Z-9D653-AF
- Base No.: 9D653
- Item Weight: 10.50 Pounds
- Item Dimensions: 16.5 x 4.7 x 26.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6W1Z-9D653-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Lincoln Town Car Submodels:
- Designer Series, Executive, Executive L, Protection Series, Signature, Signature L, Signature Limited | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS

2005 Lincoln Town Car Vapor Canister

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Lincoln Town Car Vapor Canister available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Lincoln Town Car Vapor Canister as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Lincoln Town Car Vapor Canister Parts Q&A

Q: How to Service and Repair the Vapor Canister on 2005 Lincoln Town Car?
A: Any efforts to service or repair the evaporative emission control canister require starting with the vehicle in neutral position at a hoist. The safety process starts with disconnecting the battery cable to reduce the possibility of electrical sparks which could trigger fuel vapor combustion. The next step requires you to disconnect the evaporative emission (EVAP) vapor tube quick connect coupling then unclip its retaining clip before removing the breather tube from the frame. You need to uninstall the EVAP canister bracket assembly retainers through unfastening two nuts and three rivets from their position. First disconnect the electrical connector of the EVAP canister vent solenoid before separating the EVAP canister from the vehicle. Installation of the new canister follows the opposite order of removal steps while including leakage testing and a necessary drive cycle for evaporative emission repair verification.