How to Service and Repair the Vapor Canister on Lincoln Town Car?

In order to fix the evaporative emission control canister, place vehicle in neutral position on a hoist, disconnect battery ground and remove evap vapor tube and breather tube. Unscrew the canister retainers, unscrew the vent solenoid, and unscrew the canister. Install a new canister and make a leak test.

How to service the Vapor Canister on Lincoln Town Car?

The evaporative emission control canister may be serviced by disconnecting battery ground cable, lifting up the vehicle, and removing the canister vent solenoid and fuel vapor hose assemblies. Take out EVAP canister and place it in again by reversing the process. Perform a verification drive cycle and leak test thereafter.

OEM Lincoln Town Car Vapor Canister

Fuel Vapor Canister

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Vapor Canisters found

View related parts
Lincoln Town Car Vapor Canister Part Number: F6DZ-9D653-BA
$163.54 MSRP: $269.09
You Save: $105.55 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Reservoir Assembly; Vapor Canister Purge Solenoid
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2005 Lincoln Town Car | Cartier, Cartier L, Executive, Executive L, Executive Protection Series, Protection Series, Signature, Signature L, Signature Limited, Ultimate, Ultimate L | 8 Cyl 4.6 L GAS
View related parts
Lincoln Town Car Vapor Canister Part Number: 6W1Z-9D653-AA
$452.24 MSRP: $750.91
You Save: $298.67 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cannister - Fuel Vapour Storage; Vapor Canister Purge Solenoid; Cannister - Fuel Vapour Store
- Manufacturer Note: Complete asy., canister, vent valve, bracket and hoses.
- Replaces: 5W1Z-9D653-AF
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2011 Lincoln Town Car | Designer Series, Executive, Executive L, Protection Series, Signature, Signature L, Signature Limited | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Lincoln Town Car Vapor Canister Part Number: E2ZZ-9D653-A
Product Specifications
- Other Name: Reservoir Assembly; Vapor Canister Purge Solenoid; Air Control Valve
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1986-1994 Lincoln Town Car | Base, Cartier, Cypress, Executive, Jack Nicklaus, Signature, Signature SE, Touring Edition, Tournament Edition | 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS
View related parts
Lincoln Town Car Vapor Canister Part Number: E5TZ-9D653-A
Product Specifications
- Other Name: Reservoir Assembly; Vapor Canister Purge Solenoid; Potentiometer
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1984-1985 Lincoln Town Car | Base, Cartier, Signature | 8 Cyl 5.0 L GAS

Lincoln Town Car Vapor Canister

Welcome to our website where you can discover high-quality, genuine Lincoln Town Car Vapor Canister. We offer an extensive inventory of OEM Lincoln Town Car Vapor Canister at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Lincoln Town Car Vapor Canister Parts and Q&A

Vapor Canister
6W1Z-9D653-AA
Q: How to Service and Repair the Vapor Canister on Lincoln Town Car?
A: In order to fix the evaporative emission control canister, place vehicle in neutral position on a hoist, disconnect battery ground and remove evap vapor tube and breather tube. Unscrew the canister retainers, unscrew the vent solenoid, and unscrew the canister. Install a new canister and make a leak test.
Vapor Canister
F6DZ-9D653-BA
Q: How to service the Vapor Canister on Lincoln Town Car?
A: The evaporative emission control canister may be serviced by disconnecting battery ground cable, lifting up the vehicle, and removing the canister vent solenoid and fuel vapor hose assemblies. Take out EVAP canister and place it in again by reversing the process. Perform a verification drive cycle and leak test thereafter.