OEM 2005 Mercury Grand Marquis Vapor Canister

2005 Mercury Grand Marquis Vapor Canister Parts Questions & Experts Answers

• Q: How to Service and Repair the Vapor Canister on 2005 Mercury Grand Marquis?

  A: The first task for evaporative emission control canister servicing should start by placing the vehicle in NEUTRAL position on a hoist. Pulling the ground cable from the battery will lower the risk of hazardous electrical energy discharges that might trigger fuel vapor ignition. The quick connect coupling of the EVAP vapor tube needs disconnection followed by a retaining clip removal step to obtain the breather tube from the frame. Use a wrench to remove first two bolts then three rivets from the EVAP canister and bracket assembly retainers. Opposite first disconnect the EVAP canister vent solenoid electrical connector so you can take off the EVAP canister from the vehicle. The installation of the new canister requires following the removal steps in reverse while you must conduct a system leak test followed by performing the evaporative emission repair verification drive cycle.