How to service the rear window wiper motor on 2005 Mercury Montego?

In order to service the rear window wiper motor, liftgate trim panel and wiper pivot arm must be removed. Un screw the nut and tighten it to 18 Nm then re-install it. Unscrew the electrical connector and unscrew three bolts, screwing them tightly- 10 Nm- when reattaching. Installation Revert the installation by reversing the steps.

OEM 2005 Mercury Montego Wiper Motor

Windshield Wiper Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wiper Motor found

View related parts
2005 Mercury Montego Wiper Motor Part Number: 6L1Z-17508-AARM
Product Specifications
- Other Name: Remanufactured Motor Assembly - Wiper; Windshield Wiper Motor; Wiper Linkage; Motor & Linkage; Front Motor; Motor; Motor Assembly - Wiper
- Replaces: 4R3Z-17508-AA, 5L2Z-17508-AA, 6W6Z-17508-AA, 6L2Z-17508-AA, 2C3Z-17508-AA, WM-634, 2L1Z-17508-AA, 3L2Z-17508-AA, 4W6Z-17508-B, 6L1Z-17V508-AARM, 6L1Z-17508-AB, 6W1Z-17508-AA, 6W4Z-17508-AA, WM-681, WM-651, WM-652
- Base No.: 17508
- Item Weight: 4.30 Pounds
- Item Dimensions: 10.1 x 4.4 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L1Z-17508-AARM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Mercury Montego Submodels:
- Luxury, Premier | 6 Cyl 3.0 L GAS

2005 Mercury Montego Wiper Motor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Mercury Montego Wiper Motor available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Mercury Montego Wiper Motor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Mercury Montego Wiper Motor Parts Q&A

Q: How to service the rear window wiper motor on 2005 Mercury Montego?
A: In order to service the rear window wiper motor, liftgate trim panel and wiper pivot arm must be removed. Un screw the nut and tighten it to 18 Nm then re-install it. Unscrew the electrical connector and unscrew three bolts, screwing them tightly- 10 Nm- when reattaching. Installation Revert the installation by reversing the steps.