How to service and repair the headlamp dimmer switch on 2005 Mercury Monterey?

The service and repair of the headlamp dimmer switch starts with removing the ignition lock cylinder from its position. The first step requires removal of the three screws that maintain the lower steering column shroud. Afterwards detach the instrument cluster finish panel and upper steering column shroud. Remove first the two screws securing the multifunction switch then disconnect its electrical connectors. Recovery of the installation requires performing the steps that were performed to remove components.

OEM 2005 Mercury Monterey Dimmer Switch

Light Dimmer Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Dimmer Switch found

View related parts
2005 Mercury Monterey Dimmer Switch
Part Number: 3F2Z-11691-AAA
Product Specifications
- Other Name: Resistor Assembly; Headlight Dimmer Switch; Instrument Light Rheostat
- Manufacturer Note: Switch - Dimmer
- Base No.: 11691
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.8 x 2.3 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3F2Z-11691-AAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Mercury Monterey Submodels:
- Base, Convenience, Luxury, Premier | 6 Cyl 4.2 L GAS

2005 Mercury Monterey Dimmer Switch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Mercury Monterey Dimmer Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Mercury Monterey Dimmer Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Mercury Monterey Dimmer Switch Parts Questions & Experts Answers

Q: How to service and repair the headlamp dimmer switch on 2005 Mercury Monterey?
A: The service and repair of the headlamp dimmer switch starts with removing the ignition lock cylinder from its position. The first step requires removal of the three screws that maintain the lower steering column shroud. Afterwards detach the instrument cluster finish panel and upper steering column shroud. Remove first the two screws securing the multifunction switch then disconnect its electrical connectors. Recovery of the installation requires performing the steps that were performed to remove components.