FordParts
My Garage
My Account
Cart
OEM 2005 Mercury Monterey Wiper Motor
Windshield Wiper Motor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Wiper Motors found
2005 Mercury Monterey Wiper Motor
Part Number: 6F2Z-17508-CARMProduct Specifications- Other Name: Remanufactured Motor Assembly - Wiper; Windshield Wiper Motor; Front Motor; Rear Motor
- Replaces: 6F2Z-17508-CA, 3F2Z-17508-AA, WM-645
- Base No.: 17508
- Item Weight: 3.50 Pounds
- Item Dimensions: 6.2 x 4.5 x 10.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6F2Z-17508-CARM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Mercury Monterey Wiper Motor
Part Number: 6F2Z-17508-AProduct Specifications- Other Name: Module; Back Glass Wiper Motor; Rear Motor
- Manufacturer Note: Includes High Mount Stop Lamp
- Replaces: 3F2Z-17508-AB
- Base No.: 17508
- Item Weight: 3.90 Pounds
- Item Dimensions: 16.9 x 7.3 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6F2Z-17508-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Mercury Monterey Wiper Motor
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Mercury Monterey Wiper Motor available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Mercury Monterey Wiper Motor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2005 Mercury Monterey Wiper Motor Parts Questions & Experts Answers
- Q: How to service the rear window wiper motor on 2005 Mercury Monterey?A: Service of the rear window wiper motor starts by taking off the liftgate interior trim panel. Start by removing first the rear wiper arm nut before taking out both rear wiper arm. The four screws must first be taken out along with disconnecting the electrical connectors before proceeding to remove the rear wiper module. Begin installation by placing the rear wiper module on the liftgate then proceed to secure the module through four screws which should be tightened to 10 Nm (89 lb-in). The electrical connectors need to be reconnected while making sure the rear wiper seal should be placed correctly on the inside of the liftgate glass with both the seal indicator facing the white dot on the glass. Fit the rear wiper arm onto position before closing it with the nut which needs to be tightened to 20 Nm (15 lb-ft). Reinstallation of the liftgate interior trim panel should be followed by cycling the rear wiper to check for proper alignment.
Related 2005 Mercury Monterey Parts
2005 Mercury Monterey Air Bag
2005 Mercury Monterey Brake Light Switch
2005 Mercury Monterey Coolant Temperature Sensor
2005 Mercury Monterey Engine Control Module
2005 Mercury Monterey Ignition Coil
2005 Mercury Monterey Mirror Switch
2005 Mercury Monterey Spark Plug
2005 Mercury Monterey Speedometer Cable
2005 Mercury Monterey Temperature Sender
2005 Mercury Monterey Transmitter
2005 Mercury Monterey Washer Pump
2005 Mercury Monterey Wiper Pivot