How to remove and replace the Door Lock Actuators for the right-hand drive assembly on 2005 Mercury Monterey?

The procedure for right-hand drive assembly actuator power sliding door motor replacement begins with opening both power sliding door and rear quarter window access points. Begin replacing the power sliding door motor by first removing the SJB fuse 11 with its 5A rating as well as the rear quarter trim panel. The first task involves removing the five drive assembly actuator pulley cable bolts followed by extracting the power sliding door center track moulding. Operating the power sliding door drive assembly actuator without cable connection will lead to damage so operatives must avoid using it. The power sliding door requires an opening space of 100 mm (4 in) against the B-pillar before extracting the front cable clip while removing the front cable. To detach the rear cable clip the door should be opened halfway before removing the rear cable. Fiber cables need to pass through the vehicle chamber before disconnection of power sliding door module electrical connectors followed by motor assembly bolt removal for complete motor extraction. The module needs to be smoothly detached from the drive assembly. Begin by installing the power sliding door module before adding the motor assembly which should be tightened to 11 Nm (8 lb-ft) using four bolts. The power sliding door module electrical connectors should be connected after checking that cables maintain distance from sheet metal and after they are fully fed through the opening. Before closing the power sliding door use it to attach the rear cable through its installed clip by positioning it tightly on the stud. After opening the power sliding door to 101.6 mm (4 in) distance from the B-pillar position install the front cable by applying its provided clip. Finnish the installation of the power sliding door center track moulding along with the five drive assembly actuator pulley cable bolts by tightening them to 11 Nm (8 lb-ft). The last step involves reinstallation of SJB fuse 11 (5A) followed by power sliding door initialization and installment of the rear quarter trim panel.

OEM 2005 Mercury Monterey Door Lock Actuators

Power Door Lock Actuator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Door Lock Actuators found

View related parts
2005 Mercury Monterey Actuator, Passenger Side
Part Number: 7F2Z-17218A42-AA
$80.56 MSRP: $109.62
You Save: $29.06 (27%)
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly; Door Lock Actuator Motor; Door Lock Actuator
- Position: Passenger Side
- Replaces: 6F2Z-17218A42-AA, 5F2Z-17218A42-AA
- Base No.: <218A42B
- Item Weight: 0.80 Pounds
- Item Dimensions: 8.2 x 2.9 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7F2Z-17218A42-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Mercury Monterey Submodels:
- Convenience, Luxury, Premier | 6 Cyl 4.2 L GAS
View related parts
2005 Mercury Monterey Lock Actuator, Front Driver Side
Part Number: 6L3Z-25218A43-AA
$45.19 MSRP: $71.76
You Save: $26.57 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly; Door Lock Actuator Motor, Front Left; Tailgate Lock Actuator; Trunk Lock Actuator; Door Lock Solenoid; Actuator; Door Lock Actuator Motor; Door Lock Actuator
- Position: Front Driver Side
- Replaces: 3L3Z-25218A43-AA
- Base No.: 218A43
- Item Weight: 0.70 Pounds
- Item Dimensions: 6.4 x 2.5 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L3Z-25218A43-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Mercury Monterey Submodels:
- Base, Convenience, Luxury, Premier | 6 Cyl 4.2 L GAS
View related parts
2005 Mercury Monterey Lock Actuator, Front Passenger Side
Part Number: 6L3Z-25218A42-AA
$65.94 MSRP: $108.49
You Save: $42.55 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly; Door Lock Motor, Front/Rear Right; Tailgate/Trunk Lock Motor; Door Lock Solenoid; Actuator; Door Lock Actuator Motor; Door Lock Actuator
- Position: Front Passenger Side
- Replaces: F81Z-25218A42-AA, F88Z-16219A64-BB
- Base No.: 218A42
- Item Weight: 1.20 Pounds
- Item Dimensions: 6.1 x 2.4 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L3Z-25218A42-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Mercury Monterey Submodels:
- Base, Convenience, Luxury, Premier | 6 Cyl 4.2 L GAS
View related parts
2005 Mercury Monterey Actuator, Driver Side
Part Number: 7F2Z-17218A43-AA
$78.10 MSRP: $108.04
You Save: $29.94 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly; Door Lock Actuator Motor; Door Lock Actuator
- Position: Driver Side
- Replaces: 5F2Z-17218A43-AA, 6F2Z-17218A43-AA
- Base No.: <218A42B
- Item Weight: 1.80 Pounds
- Item Dimensions: 8.2 x 2.9 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7F2Z-17218A43-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Mercury Monterey Submodels:
- Convenience, Luxury, Premier | 6 Cyl 4.2 L GAS
View related parts
2005 Mercury Monterey Latch Assembly, Passenger Side
Part Number: 5F2Z-17264A00-B
$151.08 MSRP: $205.59
You Save: $54.51 (27%)
ADD TO CART
Product Specifications
- Other Name: Remote Control System; Sliding Door Latch, Right; Door Latch Assembly; Door Lock; Lock
- Position: Passenger Side
- Base No.: 264A00
- Item Weight: 4.50 Pounds
- Item Dimensions: 6.0 x 13.0 x 11.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5F2Z-17264A00-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Mercury Monterey Submodels:
- Base, Convenience, Luxury, Premier | 6 Cyl 4.2 L GAS
View related parts
2005 Mercury Monterey Lock Actuator, Rear
Part Number: 4C2Z-16218A42-CA
$60.91 MSRP: $96.73
You Save: $35.82 (38%)
Product Specifications
- Other Name: Actuator Assembly; Door Lock Actuator Motor, Center, Rear, Rear Rearward; Liftgate Actuator; Actuator; Door Lock Actuator Motor; Door Lock Actuator
- Position: Rear
- Base No.: 218A42
- Item Weight: 0.50 Pounds
- Item Dimensions: 8.4 x 7.9 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4C2Z-16218A42-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Mercury Monterey Submodels:
- Convenience, Luxury, Premier | 6 Cyl 4.2 L GAS
View related parts
2005 Mercury Monterey Latch Assembly, Driver Side
Part Number: 5F2Z-17264A01-B
Product Specifications
- Other Name: Remote Control System; Sliding Door Latch, Left; Door Latch Assembly; Door Lock
- Position: Driver Side
- Replaces: 5F2Z-17264A01-AB, 5F2Z-17264A01-AA
- Base No.: <264A00A
- Item Weight: 4.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5F2Z-17264A01-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Mercury Monterey Submodels:
- Base, Convenience, Luxury, Premier | 6 Cyl 4.2 L GAS

2005 Mercury Monterey Door Lock Actuators

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Mercury Monterey Door Lock Actuators available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Mercury Monterey Door Lock Actuators as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Mercury Monterey Door Lock Actuators Parts Questions & Experts Answers

Q: How to remove and replace the Door Lock Actuators for the right-hand drive assembly on 2005 Mercury Monterey?
A: The procedure for right-hand drive assembly actuator power sliding door motor replacement begins with opening both power sliding door and rear quarter window access points. Begin replacing the power sliding door motor by first removing the SJB fuse 11 with its 5A rating as well as the rear quarter trim panel. The first task involves removing the five drive assembly actuator pulley cable bolts followed by extracting the power sliding door center track moulding. Operating the power sliding door drive assembly actuator without cable connection will lead to damage so operatives must avoid using it. The power sliding door requires an opening space of 100 mm (4 in) against the B-pillar before extracting the front cable clip while removing the front cable. To detach the rear cable clip the door should be opened halfway before removing the rear cable. Fiber cables need to pass through the vehicle chamber before disconnection of power sliding door module electrical connectors followed by motor assembly bolt removal for complete motor extraction. The module needs to be smoothly detached from the drive assembly. Begin by installing the power sliding door module before adding the motor assembly which should be tightened to 11 Nm (8 lb-ft) using four bolts. The power sliding door module electrical connectors should be connected after checking that cables maintain distance from sheet metal and after they are fully fed through the opening. Before closing the power sliding door use it to attach the rear cable through its installed clip by positioning it tightly on the stud. After opening the power sliding door to 101.6 mm (4 in) distance from the B-pillar position install the front cable by applying its provided clip. Finnish the installation of the power sliding door center track moulding along with the five drive assembly actuator pulley cable bolts by tightening them to 11 Nm (8 lb-ft). The last step involves reinstallation of SJB fuse 11 (5A) followed by power sliding door initialization and installment of the rear quarter trim panel.