FordParts
My Garage
My Account
Cart
OEM 2005 Mercury Monterey Oil Pressure Switch
Oil Pressure Sender Switch- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Oil Pressure Switch found
Product Specifications- Other Name: Switch Assembly - Oil Pressure; Engine Oil Pressure Switch
- Replaces: 1U5Z-9278-FA
- Base No.: 9278
- Item Weight: 0.20 Pounds
- Item Dimensions: 6.1 x 4.2 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6U5Z-9278-K
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Mercury Monterey Oil Pressure Switch
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Mercury Monterey Oil Pressure Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Mercury Monterey Oil Pressure Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2005 Mercury Monterey Oil Pressure Switch Parts Q&A
- Q: How to Service the Oil Pressure Switch on 2005 Mercury Monterey?A: A proper servicing of the oil pressure switch requires a clean working area to avoid foreign objects from entering the oil or coolant system which could result in engine failure. Before accessing the oil pressure switch, you must first remove the generator followed by removal of the accessory drive belt idler pulley along with the generator brace bolt which requires 47 Nm (35 ft. lbs.) torque when rejoining. Install the two A/C compressor mounting bracket brace bolts using 25 Nm (18 feet pounds) torque when ready for reuse. The installation requires removal of the A/C compressor mounting bracket brace, as well as the two long bolts and generator mounting bracket as one assembly unit before installation while tightening the assembly to 47 Nm (35 ft. lbs.) torque. After disconnecting the electrical connection of the oil pressure switch, the technician must remove it before reinstalling the component with a torque setting of 27 Nm (20 ft. lbs.). Finish the installation by reversing all original removal methods.