How to service and repair the Automatic Transmission Shifter on 2005 Mercury Mountaineer?

You need to make sure that the vehicle is in PARK on a hoist to fix the transmission selector lever. Take the steering column panel screws out, unplug the TCS connector and throw away the old pin of the selector lever. Install a new pin and undo the steps of removal and check that TCS works later.

OEM 2005 Mercury Mountaineer Automatic Transmission Shifter

AT Shifter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Automatic Transmission Shifter found

View related parts
2005 Mercury Mountaineer Shift Lever Part Number: 5L2Z-7210-AA
Product Specifications
- Other Name: Lever - Transmission Gear Shift; Automatic Transmission Shift Lever; Gear Shift Assembly
- Replaces: 1L2Z-7210-AD
- Base No.: 7210
- Item Weight: 0.90 Pounds
- Item Dimensions: 3.4 x 3.5 x 13.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L2Z-7210-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Mercury Mountaineer Submodels:
- Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS

2005 Mercury Mountaineer Automatic Transmission Shifter

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Mercury Mountaineer Automatic Transmission Shifter available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Mercury Mountaineer Automatic Transmission Shifter as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Mercury Mountaineer Automatic Transmission Shifter Parts Q&A

Q: How to service and repair the Automatic Transmission Shifter on 2005 Mercury Mountaineer?
A: You need to make sure that the vehicle is in PARK on a hoist to fix the transmission selector lever. Take the steering column panel screws out, unplug the TCS connector and throw away the old pin of the selector lever. Install a new pin and undo the steps of removal and check that TCS works later.