FordParts
My Garage
My Account
Cart
OEM 2005 Mercury Mountaineer Bumper
Bumper Fascia- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Bumpers found
2005 Mercury Mountaineer Bumper Cover Part Number: 1L2Z-17K835-YB
Product Specifications- Other Name: Cover
- Manufacturer Note: Paint to match
- Base No.: 17K835
- Item Weight: 11.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L2Z-17K835-YB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Mercury Mountaineer Bumper Cover Part Number: 1L2Z-17K835-XB
Product Specifications- Other Name: Cover
- Base No.: 17K835
- Item Weight: 10.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L2Z-17K835-XB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Mercury Mountaineer Bumper Cover Part Number: 1L2Z-17D957-UA
Product Specifications- Other Name: Cover
- Base No.: 17D957
- Item Weight: 9.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L2Z-17D957-UA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Mercury Mountaineer Bumper
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Mercury Mountaineer Bumper available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Mercury Mountaineer Bumper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2005 Mercury Mountaineer Bumper Parts Q&A
- Q: How to service and repair the front bumper cover on 2005 Mercury Mountaineer?A: Service and repair of the front bumper cover starts with disconnecting fog lamp electrical connectors when present and continuing with side lamp and front turn signal electrical connectors. The front fender inner splash shields can be accessed by removing screws and pin-type retainers followed by taking out the splash shields. You should now remove the screws located at the upper part of the bumper cover. The bottom of the front bumper cover requires rotation upward while gentle force against the top will release its four retaining tabs. The installation ends by performing the exact reverse procedure which occurred during removal.