How to service the rear seat cushion of the second row with 40 percent E-Z entry and quad bucket on 2005 Mercury Mountaineer?

The service of the second row rear seat cushion requires 40 percent E-Z entry and quad bucket setup where technicians should first remove the seat and backrest before proceeding. Begin the procedure by removing both the release handle alongside its screw before proceeding to detach the screws and latch covers from the left and right sides. Cautious detachment of the seat upholstery from hook and loop strip is essential because it minimizes the chance of tearing the seat cushion foam pad. Unfasten the J-clips and hook and loop fasteners and remove the cable from the seat riser as you detach the cushion trim cover. The next step consists of removing the seat cushion foam pad in addition to the two lower latch cover screws and the two left-hand lower latch covers. The left and right latches function as a single assembly through cables which requires professional handling because the four bolts must be removed while the assembly needs proper tightening to 40 Nm (30 lb-ft). Before reassembly you must detach the two latch nuts which free the latch pivot from its assembly before torquing to 40 Nm (30 lb-ft). Keep the cable on track according to markup when installing while taking out the riser attachment cable, torsion rod, and cushion pad support. When reinstalling remove the front spring hinge bolts and springs with the seat cushion frame assembly while tightening the bolts to 23 Nm (17 lb-ft). The dismantling process finishes through the reverse order of steps performed.

OEM 2005 Mercury Mountaineer Seat Cushion

Seat Pad Cushion

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Seat Cushions found

View related parts
2005 Mercury Mountaineer Seat Cushion Pad, Front Part Number: 3L2Z-78632A22-AA
$104.37 MSRP: $151.92
You Save: $47.55 (32%)
ADD TO CART
Product Specifications
- Other Name: Pad; Seat Cushion Pad, Front; Seat Cushion
- Position: Front
- Replaces: 1L2Z-78632A22-AA
- Base No.: <632A22
- Item Weight: 5.40 Pounds
- Item Dimensions: 43.3 x 25.0 x 21.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 3L2Z-78632A22-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Mercury Mountaineer Submodels:
- Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2005 Mercury Mountaineer Seat Cushion Pad, Rear Driver Side Part Number: 3L2Z-7863841-BA
$22.79 MSRP: $31.52
You Save: $8.73 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Rear Seat Cushion; Seat Cushion Foam, Rear Left; Seat Cushion
- Position: Rear Driver Side
- Base No.: <63840C
- Item Weight: 2.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3L2Z-7863841-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Mercury Mountaineer Submodels:
- Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2005 Mercury Mountaineer Seat Cushion, Rear Part Number: 3L9Z-7863840-BA
$22.76 MSRP: $31.49
You Save: $8.73 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Rear Seat Cushion
- Position: Rear
- Base No.: <63840B
- Item Weight: 2.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3L9Z-7863840-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Mercury Mountaineer Submodels:
- Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2005 Mercury Mountaineer Seat Cushion, Rear Center Passenger Side Part Number: 4L2Z-7863840-AA
$22.45 MSRP: $31.06
You Save: $8.61 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Rear Seat Cushion; Seat Cushion Foam, Center Right
- Position: Rear Center Passenger Side
- Base No.: <63840A
- Item Weight: 2.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L2Z-7863840-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Mercury Mountaineer Submodels:
- Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2005 Mercury Mountaineer Seat Cushion, Rear Center Driver Side Part Number: 4L2Z-7863841-AA
$30.62 MSRP: $42.36
You Save: $11.74 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Rear Seat Cushion; Seat Cushion Foam, Center Left
- Position: Rear Center Driver Side
- Base No.: <63840B
- Item Weight: 2.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L2Z-7863841-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Mercury Mountaineer Submodels:
- Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2005 Mercury Mountaineer Seat Back Pad, Front Part Number: 3L2Z-7864810-BA
Product Specifications
- Other Name: Pad; Seat Back Cushion, Front
- Position: Front
- Replaces: 1L2Z-7864810-BA
- Base No.: <64810
- Item Weight: 7.80 Pounds
- Item Dimensions: 30.3 x 30.6 x 13.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 3L2Z-7864810-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Mercury Mountaineer Submodels:
- Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2005 Mercury Mountaineer Seat Cushion, Rear Part Number: 1L2Z-7863840-AA
Product Specifications
- Other Name: Pad - Rear Seat Cushion; Seat Cushion Foam, Rear
- Position: Rear
- Base No.: <63840
- Item Weight: 6.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L2Z-7863840-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Mercury Mountaineer Submodels:
- Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2005 Mercury Mountaineer Seat Cushion Pad, Rear Passenger Side Part Number: 3L2Z-7863840-BA
Product Specifications
- Other Name: Pad - Rear Seat Cushion; Seat Cushion Foam, Rear Right; Seat Cushion
- Position: Rear Passenger Side
- Base No.: <63840A
- Item Weight: 2.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3L2Z-7863840-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Mercury Mountaineer Submodels:
- Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS

2005 Mercury Mountaineer Seat Cushion

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Mercury Mountaineer Seat Cushion available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Mercury Mountaineer Seat Cushion as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Mercury Mountaineer Seat Cushion Parts Q&A

Q: How to service the rear seat cushion of the second row with 40 percent E-Z entry and quad bucket on 2005 Mercury Mountaineer?
A: The service of the second row rear seat cushion requires 40 percent E-Z entry and quad bucket setup where technicians should first remove the seat and backrest before proceeding. Begin the procedure by removing both the release handle alongside its screw before proceeding to detach the screws and latch covers from the left and right sides. Cautious detachment of the seat upholstery from hook and loop strip is essential because it minimizes the chance of tearing the seat cushion foam pad. Unfasten the J-clips and hook and loop fasteners and remove the cable from the seat riser as you detach the cushion trim cover. The next step consists of removing the seat cushion foam pad in addition to the two lower latch cover screws and the two left-hand lower latch covers. The left and right latches function as a single assembly through cables which requires professional handling because the four bolts must be removed while the assembly needs proper tightening to 40 Nm (30 lb-ft). Before reassembly you must detach the two latch nuts which free the latch pivot from its assembly before torquing to 40 Nm (30 lb-ft). Keep the cable on track according to markup when installing while taking out the riser attachment cable, torsion rod, and cushion pad support. When reinstalling remove the front spring hinge bolts and springs with the seat cushion frame assembly while tightening the bolts to 23 Nm (17 lb-ft). The dismantling process finishes through the reverse order of steps performed.