How to Service the Coolant Temperature Sensor on 2005 Mercury Sable?

One must start sensor servicing for the ECT by disconnecting ground battery cables then draining liquid from the cooling system. The ECT sensor requires sensor removal after disconnecting its electrical connector. The reverse process used for removal should be performed to finish the installation.

OEM 2005 Mercury Sable Coolant Temperature Sensor

Coolant Water Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Coolant Temperature Sensor found

View related parts
2005 Mercury Sable Coolant Temperature Sensor
Part Number: 3L8Z-12A648-AA
$53.26 MSRP: $87.64
You Save: $34.38 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Engine Coolant Temperature; Engine Coolant Temperature Sensor; Air Temperature Sensor; HVAC System Switch; Temperature Sensor; Sensor
- Manufacturer Note: Rectangular connector with 2 flat pins, DOHC
- Base No.: 12A648
- Item Weight: 0.20 Pounds
- Item Dimensions: 6.2 x 4.1 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3L8Z-12A648-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Mercury Sable Submodels:
- LS, LS Premium, Platinum Edition | 6 Cyl 3.0 L GAS

2005 Mercury Sable Coolant Temperature Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Mercury Sable Coolant Temperature Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Mercury Sable Coolant Temperature Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Mercury Sable Coolant Temperature Sensor Parts Questions & Experts Answers

Q: How to Service the Coolant Temperature Sensor on 2005 Mercury Sable?
A: One must start sensor servicing for the ECT by disconnecting ground battery cables then draining liquid from the cooling system. The ECT sensor requires sensor removal after disconnecting its electrical connector. The reverse process used for removal should be performed to finish the installation.