How to service and repair the Vehicle Speed Sensor for the Output Shaft on the 3.0L (2V) engine on 2005 Mercury Sable?

Service and repair of the Output Shaft Speed (OSS) Sensor for 3.0L (2V) engines should start by disconnecting its connector located under the right-hand exhaust manifold. You must begin by disconnecting the OSS sensor cover at both its connector and bolt then taking off the bolt and cover itself away. Following these procedures you should gently extract the OSS sensor. Prior to new sensor installation you must apply lubrication to the OSS O-ring. Finish the installation by repeating all steps that were used for sensor removal.

OEM 2005 Mercury Sable Vehicle Speed Sensor

VSS

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Vehicle Speed Sensor found

View related parts
2005 Mercury Sable Speed Sensor
Part Number: YF1Z-7H103-AA
$169.23 MSRP: $230.30
You Save: $61.07 (27%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Output Shaft; Vehicle Speed Sensor; Sensor - Output Shaft Speed
- Manufacturer Note: Sensor - OSS, 1F2P-C*
- Base No.: 7H103
- Item Weight: 0.30 Pounds
- Item Dimensions: 8.7 x 7.9 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YF1Z-7H103-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Mercury Sable Submodels:
- GS, LS, LS Premium, Platinum Edition | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

2005 Mercury Sable Vehicle Speed Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Mercury Sable Vehicle Speed Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Mercury Sable Vehicle Speed Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Mercury Sable Vehicle Speed Sensor Parts Questions & Experts Answers

Q: How to service and repair the Vehicle Speed Sensor for the Output Shaft on the 3.0L (2V) engine on 2005 Mercury Sable?
A: Service and repair of the Output Shaft Speed (OSS) Sensor for 3.0L (2V) engines should start by disconnecting its connector located under the right-hand exhaust manifold. You must begin by disconnecting the OSS sensor cover at both its connector and bolt then taking off the bolt and cover itself away. Following these procedures you should gently extract the OSS sensor. Prior to new sensor installation you must apply lubrication to the OSS O-ring. Finish the installation by repeating all steps that were used for sensor removal.