OEM 2006 Ford E-150 EGR Valve

2006 Ford E-150 EGR Valve Parts Questions & Experts Answers

• Q: How to Service and Repair the EGR Valve System Module on 2006 Ford E-150?

  A: A technician must start Exhaust Gas Recirculation (EGR) system module service and repair procedures by removing the engine cover and disconnecting the battery ground cable. Before unclipping the electrical connector seek to remove the red locking mechanism first. The service procedure starts by disconnecting the EGR system module electric connector followed by disconnecting its vacuum line and removing the upper exhaust manifold-to-EGR system module tube fitting nut. The EGR system module requires bolt removal before discarding its gasket. The installation procedure requires thorough cleaning of both sealing surfaces since EGR valve sealing surfaces are made of soft metals. The new EGR system module gasket should face the intake manifold with its raised ring side up before installing the EGR system module through its bolts at 25 Nm (18 lb-ft) then torquing them an additional 90 degrees. The repair process requires connecting the upper exhaust manifold-to-EGR system module tube fitting nut with a torque of 40 Nm (30 lb-ft) before attaching the EGR system module vacuum line and electrical connector by adequately pushing in the red clip. Reinstall the engine cover and complete the reconnect process by restoring the battery ground cable.