Other Name: Bulb; Center High Mount Stop Light, Rear; Engine Compartment, Back Up, Turn Signal; Parking, Dome, Interior, Tail, Car; Backup Lamp Bulb; Dome Lamp Bulb; Parking Lamp Bulb; High Mount Bulb; Exterior Bulbs.
Position: Rear
Base No.: 13466
Item Weight: 0.30 Pounds
Item Dimensions: 0.4 x 0.4 x 1.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: D7TZ-13466-A
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2006 Ford E-150 Submodels:
Base, Chateau, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
Other Name: Bulb, Turn Signal & Parking, Tail, Backup, License Plate, Side Marker, Headlight; Backup Lamp Bulb; Signal, Parking, Stop, High Mount, Cornering, License, and Parking Light Bulbs.
Position: Lower Outer
Replaces: F8DZ-13466-AB, E8AZ-13466-A
Base No.: 13466
Item Weight: 0.40 Pounds
Item Dimensions: 0.4 x 0.4 x 1.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: F5DZ-13466-B
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2006 Ford E-150 Submodels:
Base, Chateau, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
2006 Ford E-150 Headlight Bulb
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford E-150 Headlight Bulb available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford E-150 Headlight Bulb as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Ford E-150 Headlight Bulb Parts Q&A
Q: How to Safely and Correctly Service the Headlight Bulb on 2006 Ford E-150?
A: The service operation on a headlamp bulb begins with the removal of its assembly. Specially handle the bulb since it contains high-pressure gas which would result in glass shattering upon contact with either a scratched bulb or a dropped bulb; handle the bulb base while keeping hands off the glass envelope to avoid personal injury. The removal of the headlamp bulb should occur only moments before installing a new unit because prolonged exposure causes contaminants to enter and affect the performance. The headlamp bulbs No. 9004 and No. 9007 share resemblances despite being incompatible with each other A clockwise one-eighth turn with the bulb retainer allows you to remove the headlamp bulb for which you should reverse the removal steps to install a new bulb. You should prevent turning on the headlamps while the bulb remains disconnected.