How to service the vacuum brake booster on 2006 Ford E-250?

Service of the vacuum brake booster begins by shutting down the engine and applying the brake pedal several times until all reserve vacuum from the brake booster depletes. Start your vacuum brake booster service by removing the brake master cylinder along with disconnecting both the brake booster check valve and brake booster push rod. Service of the vacuum brake booster begins by removing the brake booster push rod cotter pin cover and the cotter pin after which the stoplamp switch and brake booster push rod bushing must be uninstalled. Chose to disconnect the brake booster-push rod from the brake pedal pin before unfastening the four brake booster nuts to remove the brake booster. Perform installation by executing the reverse process and torque the brake booster nuts to 25 Nm (18 ft. lbs.).

OEM 2006 Ford E-250 Brake Booster

Brake Power Booster

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Boosters found

View related parts
2006 Ford E-250 Brake Booster
Part Number: 5C2Z-2005-BA
Product Specifications
- Other Name: Booster Assembly - Brake; Power Brake Booster
- Base No.: 2005
- Item Weight: 9.50 Pounds
- Item Dimensions: 12.2 x 11.9 x 13.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5C2Z-2005-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford E-250 Submodels:
- Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
2006 Ford E-250 Brake Booster
Part Number: 6C2Z-2005-AAA
Product Specifications
- Other Name: Booster Assembly - Brake; Power Brake Booster; Booster Assembly
- Replaces: 5C2Z-2005-AA
- Base No.: 2005
- Item Weight: 14.30 Pounds
- Item Dimensions: 20.1 x 12.4 x 12.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6C2Z-2005-AAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS

2006 Ford E-250 Brake Booster

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford E-250 Brake Booster available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford E-250 Brake Booster as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford E-250 Brake Booster Parts Questions & Experts Answers

Q: How to service the vacuum brake booster on 2006 Ford E-250?
A: Service of the vacuum brake booster begins by shutting down the engine and applying the brake pedal several times until all reserve vacuum from the brake booster depletes. Start your vacuum brake booster service by removing the brake master cylinder along with disconnecting both the brake booster check valve and brake booster push rod. Service of the vacuum brake booster begins by removing the brake booster push rod cotter pin cover and the cotter pin after which the stoplamp switch and brake booster push rod bushing must be uninstalled. Chose to disconnect the brake booster-push rod from the brake pedal pin before unfastening the four brake booster nuts to remove the brake booster. Perform installation by executing the reverse process and torque the brake booster nuts to 25 Nm (18 ft. lbs.).