Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2006 Ford E-250 Brake Pads

Disc Brake Pad Set
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Brake Pads found

  • 2006 Ford E-250 Brake Pads - YU2Z-2V200-BA
    2006 Ford E-250 Brake Pads Diagram - YU2Z-2V200-BA
    View related parts

    2006 Ford E-250 Brake Pads, Rear Part Number: YU2Z-2V200-BA

    $45.79 MSRP: $66.65
    You Save: $20.86 (32%)
    ADD TO CART
    Product Specifications
    • Other Name: Pad - Brake; Disc Brake Pad Set, Rear
    • Position: Rear
    • Replaces: 2U2Z-2V200-HB, 2C2Z-2200-AA, 6C2Z-2200-C, 6C2Z-2200-E, XC2Z-2200-AB, BRF-1420, BRSD-802, 6C2Z-2200-D
    • Base No.: 2200
    • Item Weight: 5.20 Pounds
    • Item Dimensions: 2.6 x 5.5 x 8.7 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: YU2Z-2V200-BA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2006 Ford E-250 Submodels:
    • Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
  • 2006 Ford E-250 Brake Pads - 6C2Z-2200-C
    2006 Ford E-250 Brake Pads Diagram - 6C2Z-2200-C
    View related parts

    2006 Ford E-250 Rear Pads Part Number: 6C2Z-2200-C

    $45.79 MSRP: $66.65
    You Save: $20.86 (32%)
    ADD TO CART
    Product Specifications
    • Other Name: Kit - Brake Shoe And Hardware; Disc Brake Pad Set, Rear; Brake Pads; Kit - Brake Shoe And Lining; Disc Brake Pad Set
    • Position: Rear
    • Replaced by: YU2Z-2V200-BA
    • Base No.: 2200
    • Item Weight: 6.70 Pounds
    • Item Dimensions: 3.4 x 5.1 x 8.0 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 6C2Z-2200-C
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2006 Ford E-250 Submodels:
    • Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
  • 2006 Ford E-250 Brake Pads - AU2Z-2V001-D
    2006 Ford E-250 Brake Pads Diagram - AU2Z-2V001-D
    View related parts

    2006 Ford E-250 Brake Pads, Front Part Number: AU2Z-2V001-D

    $46.59 MSRP: $66.65
    You Save: $20.06 (31%)
    Product Specifications
    • Other Name: Kit - Brake Lining; Disc Brake Pad Set, Front; Front Pads
    • Position: Front
    • Replaces: 8C3Z-2V001-B, BC3Z-2001-B, BR-1333, BRF-1381, BRF-1069, BRF-1381-A, G2MZ-2V001-B, BRF-1439, 5U2Z-2V001-FA, BC3Z-2001-C, BRF-1069-A, BR-1069, BC3Z-2001-D, BC3Z-2001-F, BRF-1438, BC3Z-2001-A, BC3Z-2001-E
    • Item Weight: 6.70 Pounds
    • Item Dimensions: 8.9 x 5.4 x 2.6 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: AU2Z-2V001-D
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2006 Ford E-250 Submodels:
    • Base | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS

2006 Ford E-250 Brake Pads

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford E-250 Brake Pads available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford E-250 Brake Pads as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford E-250 Brake Pads Parts Q&A

  • Q: How to service and repair the front brake pads on 2006 Ford E-250?
    A: The repair and servicing of front brake pads in E-150, E-250, E-350 and E-450 vehicles should start with approved Dot 3 brake fluid to avoid damaging brake system components. Verify the master cylinder reservoir brake fluid level then you can make necessary adjustments. The front brake hose requires speed sensor wiring release before setting the vehicle on a hoist in Neutral position. Secure the brake caliper with mechanic's wire and eliminate the two caliper bolts before placing the caliper to the side without letting it dangle from the flexible hose. The brake pad retaining spring removal plus two brake pads removal process requires the disposal of retraction clips on E-150 vehicles. During inspection check if brake pads need replacement because lining thickness exceeds recommended distance from brake metal support plate. Replace brake pads and discs in entire axle pair. The brake caliper must be inspected for leaks because caliper disassembly becomes necessary when leaks are detected. The brake pad installation process requires new hardware from the kit as well as four new retracting clips that need installation alongside caliper piston compression with a suitable tool and a worn pad. Install brake pads into the caliper and place retaining springs into E-150 when the rubber caliper sleeve boots contain caliper grease. After attaching the speed sensor wiring to the front brake hose ensure that the bottom caliper bolt receives the first tightening before the top and ensure caliper pin boots are properly seated. Feed the brake caliper into its position while installing its two bolts with proper torque settings of 32 Nm (24 ft. lbs.) for E-150 and 31 Nm (23 ft. lbs.) for E-250, E-350, and E-450. Regular testing of the brakes should follow a brake fluid refill with clean Dot 3 fluid into the master cylinder reservoir.

Related 2006 Ford E-250 Parts

Alternate Year Models

+
2005 Ford E-250 Brake Pads 2007 Ford E-250 Brake Pads