How to service the windshield wiper motor on 2006 Ford E-250?

The service of windshield wiper motor starts with taking out the windshield wiper pivot arms and cowl top vent panels from the vehicle. Start by separating the windshield wiper mounting arm and pivot shaft and move onwards to unfasten the access cover from the dash panel together with its retaining clip. The windshield wiper mounting arm must separate from the pivot shaft before disconnecting the electrical connector that leads to the windshield wiper motor removal. Install the three bolts with tight torque settings at 9 Nm (80 lb-in). The process ends by performing the reverse steps of removal.

OEM 2006 Ford E-250 Wiper Motor

Windshield Wiper Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wiper Motor found

View related parts
2006 Ford E-250 Wiper Motor, Front
Part Number: LC2Z-17508-A
$144.82 MSRP: $229.96
You Save: $85.14 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Assembly - Wiper; Windshield Wiper Motor, Front; Motor
- Position: Front
- Condition: New
- Fitment Type: Direct Replacement
- SKU: LC2Z-17508-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following 2006 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG

2006 Ford E-250 Wiper Motor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford E-250 Wiper Motor available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford E-250 Wiper Motor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford E-250 Wiper Motor Parts Questions & Experts Answers

Q: How to service the windshield wiper motor on 2006 Ford E-250?
A: The service of windshield wiper motor starts with taking out the windshield wiper pivot arms and cowl top vent panels from the vehicle. Start by separating the windshield wiper mounting arm and pivot shaft and move onwards to unfasten the access cover from the dash panel together with its retaining clip. The windshield wiper mounting arm must separate from the pivot shaft before disconnecting the electrical connector that leads to the windshield wiper motor removal. Install the three bolts with tight torque settings at 9 Nm (80 lb-in). The process ends by performing the reverse steps of removal.