How Should the Sway Bar Bushing Be Installed on 2006 Ford Escape?

The flanges should be elevated and the split points should be in the rear when it comes to installing sway bar bushings. Install the vehicle in neutral on a hoist, take out the 2 bolts and bracket and tighten to 70 Nm (52 ft. lbs.) when replacing. Check the wear and replace where necessary and then proceed to reverse the process of taking off.

OEM 2006 Ford Escape Sway Bar Bushing

Stabilizer Sway Bar Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Sway Bar Bushing found

View related parts
2006 Ford Escape Stabilizer Bar Insulator, Front Part Number: 5L8Z-5484-CA
$19.24 MSRP: $28.00
You Save: $8.76 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bush; Front Suspension Stabilizer Bar Bushing Kit.; Bushings
- Position: Front
- Base No.: 5493
- Item Weight: 0.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 5L8Z-5484-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Escape Submodels:
- Hybrid, Limited, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS

2006 Ford Escape Sway Bar Bushing

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Escape Sway Bar Bushing available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Escape Sway Bar Bushing as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford Escape Sway Bar Bushing Parts Q&A

Q: How Should the Sway Bar Bushing Be Installed on 2006 Ford Escape?
A: The flanges should be elevated and the split points should be in the rear when it comes to installing sway bar bushings. Install the vehicle in neutral on a hoist, take out the 2 bolts and bracket and tighten to 70 Nm (52 ft. lbs.) when replacing. Check the wear and replace where necessary and then proceed to reverse the process of taking off.