How to Properly Install Sway Bar Bushing on a 2007 Ford Escape?

Service starts with putting the vehicle in neutral position and hoisting it before performing any work on the sway bar bushing. Secure the two sway bar bolt by tightening them to 70 Nm (52 ft. lbs.) after bracket installation. The sway bar bushing should be checked for wear and tear as a new part needs to be installed if such wear occurs. The installation ends through the reverse process where you align the bushings with proper orientation to match the flanges' upward position and splits facing forward.

OEM 2007 Ford Escape Sway Bar Bushing

Stabilizer Sway Bar Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Sway Bar Bushing found

View related parts
2007 Ford Escape Stabilizer Bar Insulator, Front Part Number: 5L8Z-5484-CA
$19.24 MSRP: $28.00
You Save: $8.76 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bush; Front Suspension Stabilizer Bar Bushing Kit.; Bushings
- Position: Front
- Base No.: 5493
- Item Weight: 0.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 5L8Z-5484-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Escape Submodels:
- Hybrid, Limited, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS

2007 Ford Escape Sway Bar Bushing

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Escape Sway Bar Bushing available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Escape Sway Bar Bushing as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford Escape Sway Bar Bushing Parts Q&A

Q: How to Properly Install Sway Bar Bushing on a 2007 Ford Escape?
A: Service starts with putting the vehicle in neutral position and hoisting it before performing any work on the sway bar bushing. Secure the two sway bar bolt by tightening them to 70 Nm (52 ft. lbs.) after bracket installation. The sway bar bushing should be checked for wear and tear as a new part needs to be installed if such wear occurs. The installation ends through the reverse process where you align the bushings with proper orientation to match the flanges' upward position and splits facing forward.