How to service the brake light switch on 2006 Ford Expedition?

Maintenance of the brake light switch requires user to first remove the electrical connector which connects to the stoplamp switch. First detach the self-locking pin before removing the stoplamp switch from its positions on the brake booster push rod as well as the brake pedal assembly. Follow the reverse order of the removal procedure when installing the new switch.

OEM 2006 Ford Expedition Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Light Switch found

View related parts
2006 Ford Expedition Stoplamp Switch Part Number: 4L3Z-13480-AA
$58.50 MSRP: $96.25
You Save: $37.75 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly - Stop Light; Back Up Light Switch; Brake Light Switch; Back-Up Switch
- Replaces: 2L1Z-13480-AA
- Base No.: 13480
- Item Weight: 0.30 Pounds
- Item Dimensions: 6.2 x 4.1 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L3Z-13480-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Expedition Submodels:
- Eddie Bauer, King Ranch, Limited, NBX, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS

2006 Ford Expedition Brake Light Switch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Expedition Brake Light Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Expedition Brake Light Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford Expedition Brake Light Switch Parts Q&A

Q: How to service the brake light switch on 2006 Ford Expedition?
A: Maintenance of the brake light switch requires user to first remove the electrical connector which connects to the stoplamp switch. First detach the self-locking pin before removing the stoplamp switch from its positions on the brake booster push rod as well as the brake pedal assembly. Follow the reverse order of the removal procedure when installing the new switch.