My Garage
Cart

OEM 2007 Ford Expedition Brake Light Switch

Brake Lamp Switch
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Light Switch found

  • 2007 Ford Expedition Brake Light Switch - GL3Z-13480-A
    2007 Ford Expedition Brake Light Switch Diagram - GL3Z-13480-A
    View related parts

    2007 Ford Expedition Washer Pump Part Number: GL3Z-13480-A

    $33.57 MSRP: $54.15
    You Save: $20.58 (39%)
    Ships in 1 Business Day
    ADD TO CART
    Product Specifications
    • Other Name: Switch Assembly - Stop Light; Brake Light Switch; Stop Light Switch; Stoplamp Switch
    • Replaces: 7T4Z-13480-AA, 8T4Z-13480-A, SW-6892
    • Item Weight: 0.30 Pounds
    • Item Dimensions: 0.1 x 4.2 x 7.1 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: GL3Z-13480-A
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2007 Ford Expedition Submodels:
    • Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS

2007 Ford Expedition Brake Light Switch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Expedition Brake Light Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Expedition Brake Light Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford Expedition Brake Light Switch Parts Q&A

  • Q: How to service the brake light switch on 2007 Ford Expedition?
    A: The first step before servicing the brake light switch is disconnecting its stoplamp switch electrical connector. To detach the stoplamp switch requires depressing the switch plunger because a 1-4 N (1-3 lb) force applied to the brake pedal will depress it effectively. Depress and release the brake pedal before pulling rearward to remove the switch by turning it clockwise 45 degrees. Keep the brake pedal assembly free from pressure contact because connecting or touching it could result in stoplamp switch damage. Place the stoplamp switch into position without shifting the brake pedal assembly by rotating it 45 degrees counterclockwise and finally reconnect the stoplamp switch electrical connector.

Related 2007 Ford Expedition Parts