OEM 2006 Ford Focus Throttle Cable

2006 Ford Focus Throttle Cable Parts Q&A

• Q: How to Service and Repair the Throttle Cable on 2006 Ford Focus?

  A: Start accelerator cable repair by disconnecting the air cleaner outlet pipe through clamp removal while detaching the vent tube and extracting the outlet pipe. The next step involves removing the accelerator control snow shield through the process of detaching the evaporative emissions hose pin-type retainer followed by removing the screw and pin-type retainer and then finally removing the snow shield while tightening it to 6 Nm (53 lb-in) during reinstallation. Pull the accelerator cable off the throttle body before rotating the grommet counter-clockwise to break its throttle body bracket. Remove it from the retaining clip. First disconnect the cable grommet both from the bulkhead and the footwell trim panel. First disconnect the pedal grommet from the accelerator pedal while establishing a draw cord connection to the accelerator cable in order to help with assembly. Then remove the accelerator cable. The installation includes the opposite order of steps for removal and requires grommet installation on the bulkhead then the throttle body bracket before placing the accelerator cable pedal grommet onto the pedal.