OEM 2007 Ford Focus Throttle Cable

2007 Ford Focus Throttle Cable Parts Q&A

• Q: How to Service and Repair the Throttle Cable on 2007 Ford Focus?

  A: The first step in servicing and repairing the accelerator cable involves detaching the air cleaner outlet pipe using clamp loosening then disconnection of vent tubing followed by outlet pipe removal. Start by detaching the evaporative emissions hose pin-type retainer followed by unscrewing and removing the screw and pin-type retainer and finally removing the snow shield while tightening it to 6 Nm (53 lb-in) during reinstallation. First disconnect the accelerator cable from the throttle body then use counterclockwise motion to rotate the grommet free from the throttle body bracket before taking the cable apart from its retainer clip. First remove the footwell trim panel then disconnect the accelerator cable pedal grommet from the accelerator pedal before taking off the cable grommet from the bulkhead. A draw cord needs attachment to the accelerator cable during installation while you remove the cable. The reinstallation process requires starting by reversing this process while making sure to first install the rubber grommets in the bulkhead then the throttle body bracket and finally the accelerator cable pedal grommet into the pedal.