OEM 2006 Ford Freestyle Air Bag Sensor

2006 Ford Freestyle Air Bag Sensor Parts Questions & Experts Answers

• Q: What Precautions Should Be Taken When Servicing the Air Bag Sensor in the Second Row C-Pillar on 2006 Ford Freestyle?

  A: Safety glasses should always be worn when servicing the side impact sensor in the second row C-pillar because accidental air bag deployment can cause injuries to the face and eyes. Correct sensor orientation must be established for proper operation of the system yet inspection of the sensor bracket as well as wiring pigtail requires replacement or sensor repositioning after any collision even if air bags do not deploy. The use of memory saver devices results in higher personal injury risks so they must be avoided. The air bag warning lamp turns on when the RCM fuse is removed while the ignition switch is ON but this condition does not mean there is an SRS system fault. Testing the SRS for complete functionality and absence of faults should take place before handing over the vehicle to its owner. The repair process requires substituting the unit with new components yet the original component needs reinstallation after repeating a diagnostic check for continued issues. Begin the removal process after system power depowering then remove the rear lower trim panel and detach the side impact sensor electrical connector. The retaining bolt torque for the air bag side impact sensor requires proper management as technicians should first remove the bolt then secure it at 12 Nm (9 lb-ft) for installation. Make note of the sensor position and locating tab reference to achieve proper installation. Also check that both C-pillar and side impact sensor mating surfaces remain debris-free. The system powering process can be completed by following the opposite order of removal procedures.