My Garage
Cart

OEM 2006 Ford Freestyle Blend Door Actuator

Air Blend Door Actuator
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Blend Door Actuators found

  • 2006 Ford Freestyle Blend Door Actuator Diagram - 5F9Z-19E616-EA
    View related parts

    2006 Ford Freestyle Door Actuator Part Number: 5F9Z-19E616-EA

    $36.74 MSRP: $59.27
    You Save: $22.53 (39%)
    ADD TO CART
    Product Specifications
    • Other Name: Motor Assembly; HVAC Air Adjustment Control Motor, Right; HVAC Heater Blend Door Actuator; Motor
    • Base No.: 19E616A
    • Item Weight: 0.60 Pounds
    • Item Dimensions: 6.1 x 4.2 x 4.0 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5F9Z-19E616-EA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2006 Ford Freestyle Submodels:
    • Limited, SE, SEL | 6 Cyl 3.0 L GAS
  • 2006 Ford Freestyle Blend Door Actuator Diagram - 5F9Z-19E616-GA
    View related parts
    Product Specifications
    • Other Name: Motor Assembly; HVAC Blend Door Actuator; HVAC Heater Blend Door Actuator; Motor
    • Base No.: 19E616A
    • Item Weight: 0.60 Pounds
    • Item Dimensions: 4.3 x 3.3 x 4.3 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5F9Z-19E616-GA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2006 Ford Freestyle Submodels:
    • Limited, SE, SEL | 6 Cyl 3.0 L GAS
  • 2006 Ford Freestyle Blend Door Actuator - 8F9Z-19E616-A
    2006 Ford Freestyle Blend Door Actuator Diagram - 8F9Z-19E616-A
    View related parts
    Product Specifications
    • Other Name: Motor Assembly; HVAC Floor Mode Door Actuator; Lower, Rear, Air Inlet, Blower, Heater Blend Actuators; Actuator; Blower Motor
    • Manufacturer Note: Air Distribution Mode Door
    • Position: Rear
    • Replaces: 5F9Z-19E616-CB, 5F9Z-19E616-AA
    • Base No.: 19E616A
    • Item Weight: 0.50 Pounds
    • Item Dimensions: 4.7 x 1.6 x 4.5 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 8F9Z-19E616-A
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2006 Ford Freestyle Submodels:
    • Limited, SE, SEL | 6 Cyl 3.0 L GAS
  • 2006 Ford Freestyle Blend Door Actuator - 5F9Z-19E616-CA
    2006 Ford Freestyle Blend Door Actuator Diagram - 5F9Z-19E616-CA
    View related parts
    Product Specifications
    • Other Name: Motor Assembly; HVAC Defrost Mode Door Actuator; Rear Blend Door Actuator; Heater Blend Door Actuator; Blower Motor; HVAC Blend Door Actuator
    • Manufacturer Note: Temperature Blend Door
    • Position: Rear
    • Base No.: 19E616A
    • Item Weight: 0.40 Pounds
    • Item Dimensions: 4.0 x 3.4 x 4.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5F9Z-19E616-CA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2006 Ford Freestyle Submodels:
    • Limited, SE, SEL | 6 Cyl 3.0 L GAS

2006 Ford Freestyle Blend Door Actuator

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Freestyle Blend Door Actuator available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Freestyle Blend Door Actuator as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford Freestyle Blend Door Actuator Parts Q&A

  • Q: How to service the LH temperature blend door actuator on 2006 Ford Freestyle?
    A: The LH temperature blend door actuator can be serviced by accessing it from below the LH side of the instrument panel. Start by removing the three screws fastening the actuator to place. The actuator needs to be disconnected from its electrical connector followed by removal from the mounting location. The installation process for the new actuator requires the exact opposite steps which were used for removal.