FordParts
My Garage
My Account
Cart
OEM 2006 Ford Freestyle A/C Expansion Valve
Air Conditioning Expansion Valve- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 A/C Expansion Valves found
2006 Ford Freestyle Expansion Valve, Front Part Number: 8G1Z-19849-A
$21.25 MSRP: $33.75You Save: $12.50 (38%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Valve Assembly - Evaporator Expansion; A/C Expansion Valve, Front; A/C Expansion Valve
- Manufacturer Note: Includes Attaching Hardware
- Position: Front
- Replaces: 5F9Z-19849-CA
- Base No.: 19849
- Item Weight: 0.70 Pounds
- Item Dimensions: 3.8 x 2.4 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8G1Z-19849-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Ford Freestyle Expansion Valve, Rear Part Number: 5F9Z-19849-BB
Product Specifications- Other Name: Valve Assembly - Evaporator Expansion; A/C Expansion Valve, Rear; A/C Expansion Valve
- Position: Rear
- Replaces: 5F9Z-19849-BA
- Base No.: 19849
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.0 x 2.4 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5F9Z-19849-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Ford Freestyle A/C Expansion Valve
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Freestyle A/C Expansion Valve available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Freestyle A/C Expansion Valve as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Ford Freestyle A/C Expansion Valve Parts Q&A
- Q: How to Service and Repair the A/C Expansion Valve on 2006 Ford Freestyle?A: The first step for servicing the A/C expansion valve includes recovering all refrigerant from the system. After releasing the four roll restrictor cross beam bolts, you should tighten them to 55 Nm (41 lb-ft) before reinstalling. After installation of the roll restrictor bracket bolt, you should tighten it to 48 Nm (35 lb-ft). The installation of the A/C expansion valve manifold bolt requires discarding O-ring seals before tightening it to 8 Nm (71 lb-in). The two A/C expansion valve bolts need removal before getting tightened to 8 Nm (71 lb-in) during reinstallation. Dispose of the O-ring seals which were removed from the A/C expansion valve. The reverse procedure of removal should be performed for reinstallation but with new O-ring seals and proper application of clean PAG oil in the refrigerant system. The final steps include evacuation followed by a leak test and a proper charge of the refrigeration system.