Other Name: Bulb; Center High Mount Stop Light Bulb; Back Up Light Bulb; License Plate Light Bulb; Turn Signal Light Bulb; Signal Lamp Bulb; various types for exterior and interior lighting.
Position: Rear Outer
Replaces: E9JY-13466-A, F4ZZ-13466-A
Base No.: 13466
Item Weight: 0.30 Pounds
Item Dimensions: 0.4 x 0.4 x 1.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: E5RY-13466-B
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Other Name: Bulb - Interior Lamp; Dome Light Bulb; Map Light Bulb; Car Bulbs; Bulb
Position: Front
Base No.: 13466
Item Weight: 0.40 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: 4F9Z-13466-AA
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2006 Ford Freestyle Submodels:
Limited, SE, SEL | 6 Cyl 3.0 L GAS
2006 Ford Freestyle Headlight Bulb
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Freestyle Headlight Bulb available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Freestyle Headlight Bulb as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Ford Freestyle Headlight Bulb Parts Q&A
Q: How to service the front headlight bulb on 2006 Ford Freestyle?
A: Services for the headlamp bulb require starting with the headlamp switch and ignition switch both set to OFF. You can remove the headlamp bulb on Freestyle and Five Hundred by turning it counterclockwise one eighth turn to free it from its position while disconnecting the electrical connector. The service for the Montego requires you to detach the headlamp assembly then unscrew the six screws that lock the headlamp bulb access cover. When servicing the high beam bulb users should rotate it counterclockwise by 1/8-turn before removing the electrical connector. The HID bulb requires opening of the spring retainer to extract it before disconnecting the electrical connector. When replacing the bulb consumers need to follow the installation steps in reverse order to the removal process. Handle the bulb at its base to avoid harm because the high-pressure gas inside creates the risk of bulb shattering upon envelope contact or falling accidents. The glass envelope requires no direct contact while you must keep the bulb inside the assembly until the moment before installation to maintain performance quality. Drivers must never switch on the headlamps whenever there is no bulb.