How to service and repair the rear brake disc on 2006 Ford Mustang?

Service and repair of the rear brake disc starts with hoisting the vehicle into neutral mode. Maneuver rear brake elements carefully to stoppcable disconnection of the parking brake wire from the brake caliper lever by using a proper support device for cable end fitting safety. The brake hose suffers damages when the brake caliper with anchor plate assembly remains unsupported below the hose level. Use mechanic's wire to suspend the supported caliper after removing bolts which fasten brake caliper anchor plate and caliper assembly. Next, remove the brake disc. Before mounting clean all rust and debris from the brake disc and wheel hub by using brake parts cleaner while avoiding contact between lubricant and wheel studs and brake pads and brake disc. After applying a light layer of anti-seize lubricant onto the hub flange you should install the brake caliper and anchor plate assembly while tightening its two bolts to 103 Nm (76 ft. lbs.). Testing the brakes constitutes the last step to confirm proper brake function.

OEM 2006 Ford Mustang Brake Disc

Disc Rotor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Brake Discs found

View related parts
2006 Ford Mustang Rotor, Front Part Number: DR3Z-1125-C
$110.50 MSRP: $166.67
You Save: $56.17 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly; Disc Brake Rotor, Front; Disc Brake Rotor; Brake Rotor
- Position: Front
- Replaces: 5U2Z-1V125-U, 4R3Z-1125-BA, BRRF-42, BRR-139
- Base No.: 1125
- Item Weight: 20.90 Pounds
- Item Dimensions: 3.0 x 14.0 x 14.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: DR3Z-1125-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Mustang Submodels:
- Base, GT | 6 Cyl 3.7 L GAS, 8 Cyl 4.6 L GAS
View related parts
2006 Ford Mustang Rotor Part Number: 5U2Z-1V125-MJ
$70.38 MSRP: $108.32
You Save: $37.94 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly
- Replaces: 5U2Z-1V125-HC, BRR-138, BRR-286, 4R3Z-1125-AA, 5U2Z-1V125-T, BRRF-41
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5U2Z-1V125-MJ
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following 2006 Ford Mustang Submodels:
- Base | 6 Cyl 4.0 L GAS
View related parts
2006 Ford Mustang Rotor, Rear Part Number: 5R3Z-2C026-A
Product Specifications
- Other Name: Rotor Assembly - Brake; Disc Brake Rotor, Rear; Brake Rotor
- Position: Rear
- Replaces: 5R3Z-2C026-AA, BRRF-45
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5R3Z-2C026-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Mustang Submodels:
- Base, Boss 302, Bullitt, GT, Shelby GT, Shelby GT500, Shelby GT500KR | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L GAS

2006 Ford Mustang Brake Disc

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Mustang Brake Disc available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Mustang Brake Disc as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford Mustang Brake Disc Parts Q&A

Q: How to service and repair the rear brake disc on 2006 Ford Mustang?
A: Service and repair of the rear brake disc starts with hoisting the vehicle into neutral mode. Maneuver rear brake elements carefully to stoppcable disconnection of the parking brake wire from the brake caliper lever by using a proper support device for cable end fitting safety. The brake hose suffers damages when the brake caliper with anchor plate assembly remains unsupported below the hose level. Use mechanic's wire to suspend the supported caliper after removing bolts which fasten brake caliper anchor plate and caliper assembly. Next, remove the brake disc. Before mounting clean all rust and debris from the brake disc and wheel hub by using brake parts cleaner while avoiding contact between lubricant and wheel studs and brake pads and brake disc. After applying a light layer of anti-seize lubricant onto the hub flange you should install the brake caliper and anchor plate assembly while tightening its two bolts to 103 Nm (76 ft. lbs.). Testing the brakes constitutes the last step to confirm proper brake function.