How to service the Tailgate Handle release on 2006 Ford Ranger?

The servicing of the tailgate handle requires removal of the eight access cover screws followed by tightening them to 5 Nm (44 lb-in) during reinstallation. However, the next step involves opening the clips and removing the tailgate latch actuating rods from the remote control. You will need to unscrew the nuts from the remote control of the tailgate lock before tightening them to 12 Nm (9 lb-ft) during the reinstallation step. The tailgate handle should be the next step for removal. The installation process will end with following the same steps in reverse order.

OEM 2006 Ford Ranger Tailgate Handle

Back Door Handle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Tailgate Handle found

View related parts
2006 Ford Ranger Handle, Black, Rear
Part Number: 1L5Z-9943400-AAA
$26.26 MSRP: $39.08
You Save: $12.82 (33%)
ADD TO CART
Product Specifications
- Other Name: Tailgate Handle, Rear; Exterior Door Handle; Outside Door Handle; Tailgate Handle
- Position: Rear
- Replaces: XL5Z-9943400-AAE
- Base No.: 43400
- Item Weight: 0.60 Pounds
- Item Dimensions: 10.1 x 8.0 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L5Z-9943400-AAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Ranger Submodels:
- Edge, FX4, Splash, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS

2006 Ford Ranger Tailgate Handle

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Ranger Tailgate Handle available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Ranger Tailgate Handle as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford Ranger Tailgate Handle Parts Questions & Experts Answers

Q: How to service the Tailgate Handle release on 2006 Ford Ranger?
A: The servicing of the tailgate handle requires removal of the eight access cover screws followed by tightening them to 5 Nm (44 lb-in) during reinstallation. However, the next step involves opening the clips and removing the tailgate latch actuating rods from the remote control. You will need to unscrew the nuts from the remote control of the tailgate lock before tightening them to 12 Nm (9 lb-ft) during the reinstallation step. The tailgate handle should be the next step for removal. The installation process will end with following the same steps in reverse order.