How to service the blower motor on 2006 Ford Taurus?

Service of the blower motor starts with retainer and right instrument panel insulator removal. The blower motor requires disconnecting its electrical connector and removal of three securing screws. Before wheel removal it becomes vital to clean all corrosion off the blower motor shaft to stop damage to the wheel mounting shaft. You should clean the blower motor before removing both the push clip and wheel from the motor assembly. Reinstall the system by doing the actions in reverse order of the removal process.

OEM 2006 Ford Taurus Blower Motor

A/C Heater Blower Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blower Motor found

View related parts
2006 Ford Taurus Blower Motor Part Number: 1F1Z-19805-AA
$45.20 MSRP: $61.51
You Save: $16.31 (27%)
ADD TO CART
Product Specifications
- Other Name: Motor - Cooling Blower; HVAC Blower Motor; Blower Assembly
- Replaces: 1F1Z-19805-BA, F7DZ-19805-BA
- Base No.: 19805
- Item Weight: 4.60 Pounds
- Item Dimensions: 10.4 x 8.1 x 9.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1F1Z-19805-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Taurus Submodels:
- G, GL, LX, SE, SE Comfort, SEL, SES, SHO, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 8 Cyl 3.4 L GAS

2006 Ford Taurus Blower Motor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Taurus Blower Motor available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Taurus Blower Motor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford Taurus Blower Motor Parts Q&A

Q: How to service the blower motor on 2006 Ford Taurus?
A: Service of the blower motor starts with retainer and right instrument panel insulator removal. The blower motor requires disconnecting its electrical connector and removal of three securing screws. Before wheel removal it becomes vital to clean all corrosion off the blower motor shaft to stop damage to the wheel mounting shaft. You should clean the blower motor before removing both the push clip and wheel from the motor assembly. Reinstall the system by doing the actions in reverse order of the removal process.